advertisement
![Button Functions. GE 20309 | Manualzz Button Functions. GE 20309 | Manualzz](http://s1.manualzz.com/store/data/002050293_1-b7be59416326d5e5e006d33474e5a27c-360x466.png)
Button Functions
Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.
CH may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product.
E.G., your product must have PREV.CH ability for the PREV.CH button to operate this feature.
TV, VCR, etc. selects product to be operated.
SETUP for setup.
Red Indicator
Lights when any button is pressed.
INPUT for some TVs, press repeatedly to select from available viewing sources (antenna, cable box, VCR, etc.).
PREV.CH Returns to the previously selected channel, or DVD repeat toggle.
REPEAT performs DVD players “A-B
Repeat” (or RPT A.B) function for repeat play of current Chapter or Track.
RECORD, PLAY, STOP, REW, FF, PAUSE
VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan -/+.
Note the VCR keys also control DVD when in DVD Mode.
ENTER for some TV models, used after direct channel number entry to immediately change to the selected channel.
MENU selects the on-screen menu.
GUIDE displays satellite or cable on-screen program guide.
4
Button Functions, cont.
Turns Backlight on and off.
ON•OFF Turns product
On or Off.
CHANNEL Up/Down Changes the channels TRACK +/- controls
DVD/CD track selection i.e. DVD/
CD Track Skip Up/Down (in DVD and CD modes).
INFO/DISPLAY button brings up
DVD Display or Control Menu for
Chapter/Track/Title number, Time remaining/elapsed indication, system information, etc.
VOLUME UP/DOWN changes the volume level of the product, normally the TV.
CC (SUBTITLE) TV Closed
Caption (if your TV has this feature) or DVD
Subtitle toggle.
MUTE Turns off the
TV sound while the picture remains.
NUMBERS enter numbers for direct channel selection. Some products require ENTER to be pressed after channel selection.
Dot used for digital channels like 2.3.
OK Selects menu items for the device you are controlling.
RESUME, AUDIO, ZOOM, ANGLE,
TITLE controls DVD functions.
Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds.
5
advertisement
Related manuals
advertisement
Table of contents
- 3 Setup
- 3 Battery Installation
- 3 Battery Saver
- 3 Code Saver
- 3 Code Setup
- 4 Button Functions
- 6 DVD Functions
- 7 SAT Functions
- 8 Code Entry
- 8 Direct Code Entry
- 9 Code Search
- 10 Using Your Remote
- 10 Code Identification
- 11 Controlling Devices with Power On and Off
- 11 Controlling Combo Devices
- 11 VCR/DVD/DVR Punch-Through
- 12 Volume/Mute Control and Punch-Through
- 12 All Volume/Mute Control to any one Mode
- 13 Setting any Mode for its own Volume/Mute
- 14 Troubleshooting