Graco Car Seat/Booster Seat Car Seat User Manual

8.0 Additional information

8.1 Using the Tether

All LATCH seating positions have tether anchors. If you want to use the tether, check your vehicle owner’s manual for the location(s). If your vehicle is not equipped with a tether anchor, it may be possible to install one. Contact your vehicle dealership for the proper anchor location and installation. You may purchase a tether anchor parts kit by calling Graco

Customer Service at 1-800-345-4109.

›

1. Check that tether is securely attached to car seat.

2. Fasten tether clip to anchor point

›

.

3. Tighten the tether strap securely

œ

.

4. Check car seat tightness after securing tether.

If necessary, retighten vehicle seat belt when used with the built-in harness.

5. To loosen, lift up on the metal tongue of the buckle



.

œ



31