advertisement
Fish ID Sensitivity adjusts the threshold of the
Fish ID+™ detection algorithms. Selecting a higher setting allows weaker returns to be displayed as fish. This is useful for identifying smaller fish species or baitfish. Selecting a lower setting displays fewer fish from weak sonar returns. This is helpful when seeking larger species of fish. Fish ID Sensitivity is used in conjunction with Fish ID+™. Fish ID+™ must be On for Fish ID
Sensitivity to affect the ability of the Fishfinder to identify sonar returns as fish.
To change the Fish ID Sensitivity setting:
1. Highlight Fish ID Sensitivity on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish
ID Sensitivity setting. (Low = 1, High = 10, Default = 5)
Real Time Sonar (RTS®) Window
RTS® Window sets the RTS® Window to either
Wide or Narrow, or turns it off in the Sonar View. The RTS® Window always updates at the fastest rate possible and only displays returns that are within the transducer beam. See Real Time Sonar (RTS®) Window for more information.
RTS® Window (Wide) RTS® Window (Narrow) RTS® Window (Off)
To change the RTS® Window setting:
1. Highlight RTS Window on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the RTS®
Window setting. (Wide, Narrow, Off, Default = Wide)
38
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 8 Single Beam Sonar
- 8 Dualbeam Sonar (565 Fishfinders only)
- 9 QuadraBeam PLUS™ Sonar (575 Fishfinders only)
- 14 Understanding Sonar History
- 14 Real Time Sonar (RTS®) Window
- 15 Bottom Presentation
- 18 Sonar Zoom View
- 19 200/83 kHz Split Sonar View (575 Fishfinders only)
- 20 Big Digits View
- 21 Side Beam View (575 Fishfinders only)
- 24 POWER/LIGHT Key
- 24 VIEW Key
- 25 MENU Key
- 25 4-WAY Cursor Control Key
- 25 EXIT Key
- 29 Normal Operation
- 30 Simulator
- 31 System Status
- 31 Self Test
- 32 Accessory Test
- 34 Sensitivity
- 35 Upper Range (Advanced; Sonar, Split Sonar, Big Digits Views only)
- 36 Lower Range
- 37 Chart Speed
- 38 Bottom View
- 39 Quad Layout (575 Fishfinders only, Side Beam View only)
- 39 Zoom Level (Sonar Zoom View only)
- 41 Beam Select (575 Fishfinders only)
- 42 Fish ID
- 43 Fish ID Sensitivity
- 43 Real Time Sonar (RTS®) Window
- 44 Zoom Width
- 44 83 kHz Sensitivity (Advanced; 575 Fishfinders only)
- 45 455 kHz Balance (Advanced; 575 Fishfinders only)
- 46 Depth Lines (Advanced)
- 47 Surface Clutter (Advanced)
- 48 Noise Filter (Advanced)
- 48 Max Depth (Advanced)
- 49 Water Type (Advanced)
- 51 Depth Alarm
- 51 Fish ID Alarm
- 52 Low Battery Alarm
- 52 Temp Alarm
- 53 Alarm Tone
- 55 Units - Depth
- 55 Units - Temp (International only)
- 55 Units - Distance (with Temp/Speed only)
- 56 Units - Speed (with Temp/Speed only)
- 56 User Mode