advertisement
▼
Scroll to page 2
of 86
(Advanced)
Surface Clutter adjusts the filter that removes surface clutter noise caused by algae and aeration. The lower the setting, the less surface clutter will be displayed. The Surface Clutter menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
Surface
Clutter
To change the Surface Clutter setting:
1. Make sure you are in Advanced User Mode, then highlight Surface
Clutter on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Surface Clutter setting. (Low = 1 to High = 10, Default = 5)
42
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 8 Single Beam Sonar
- 8 Dualbeam Sonar (565 Fishfinders only)
- 9 QuadraBeam PLUS™ Sonar (575 Fishfinders only)
- 14 Understanding Sonar History
- 14 Real Time Sonar (RTS®) Window
- 15 Bottom Presentation
- 18 Sonar Zoom View
- 19 200/83 kHz Split Sonar View (575 Fishfinders only)
- 20 Big Digits View
- 21 Side Beam View (575 Fishfinders only)
- 24 POWER/LIGHT Key
- 24 VIEW Key
- 25 MENU Key
- 25 4-WAY Cursor Control Key
- 25 EXIT Key
- 29 Normal Operation
- 30 Simulator
- 31 System Status
- 31 Self Test
- 32 Accessory Test
- 34 Sensitivity
- 35 Upper Range (Advanced; Sonar, Split Sonar, Big Digits Views only)
- 36 Lower Range
- 37 Chart Speed
- 38 Bottom View
- 39 Quad Layout (575 Fishfinders only, Side Beam View only)
- 39 Zoom Level (Sonar Zoom View only)
- 41 Beam Select (575 Fishfinders only)
- 42 Fish ID
- 43 Fish ID Sensitivity
- 43 Real Time Sonar (RTS®) Window
- 44 Zoom Width
- 44 83 kHz Sensitivity (Advanced; 575 Fishfinders only)
- 45 455 kHz Balance (Advanced; 575 Fishfinders only)
- 46 Depth Lines (Advanced)
- 47 Surface Clutter (Advanced)
- 48 Noise Filter (Advanced)
- 48 Max Depth (Advanced)
- 49 Water Type (Advanced)
- 51 Depth Alarm
- 51 Fish ID Alarm
- 52 Low Battery Alarm
- 52 Temp Alarm
- 53 Alarm Tone
- 55 Units - Depth
- 55 Units - Temp (International only)
- 55 Units - Distance (with Temp/Speed only)
- 56 Units - Speed (with Temp/Speed only)
- 56 User Mode