Selecting a Site. Intel MB440LX

Below you will find brief information for server MB440LX. This server supports symmetrical multiprocessing (SMP) and a variety of operating systems. It comes with both PCI and ISA buses, one narrow and two wide SCSI channels, and onboard video. The server board set consists of the system board with seven PCI expansion slots, three ISA expansion slots, and several embedded controller devices (PCI video, Dual Ultra SCSI, Narrow SCSI, and IDE), one or two Pentium II processors, a memory module with either eight 3.3 V EDO DIMM sockets for up to 1 GB of memory, or four SDRAM DIMM sockets for 512 MB of memory, and an RPX module with one SIMM† socket for RAID applications. The chassis contains a 3.5-inch diskette drive, a CD-ROM drive, and, depending on the system configuration, up to three 360 watt power supplies. Three 5.25-inch peripheral bays can house tape back-up drives, CD-ROM drives, and other mass storage devices. Any two adjacent 5.25-inch bays can be converted into a single full-height bay. The two 3.5-inch hot-docking peripheral bays, when fully configured with 10 hard disk drives, provide over 40 GB of storage. The bays allow hot-swapping drives without shutting down the system.

PDF
Document
Intel MB440LX System Installation Guide | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Supports symmetrical multiprocessing (SMP)

  • PCI and ISA buses

  • Onboard video

  • Hot-docking bays

  • Up to 3 360 watt power supplies

  • RAID support

  • System Configuration Utility (SCU)

  • Flash ROM

Frequently asked questions

The Intel MB440LX server supports up to 1 GB of memory.

The Intel MB440LX server can be configured with up to three 360 watt power supplies.

The RPX module in the Intel MB440LX server supports I2O and non-I2O RAID.

Preparing document for printing…
0%