Photography (Auto Photography) (continued)
Look through the viewfinder to compose the picture.
Press the shutter button down half way
1
, and press it down fully
2
.
• Pressing the shutter button down half way adjusts the exposure, and pressing the shutter button down fully takes the shot.
• When the focus and exposure are adjusted, the viewfinder lamp lights or blinks in green. (
➲
Page 39)
• If you shoot a picture, when preview is set to ON (
➲
Page 60), a preview image is displayed on screen for about two seconds.
• The viewfinder lamp turns red while image data is being recorded onto the SmartMedia™.
1
Press down half way.
2
Press down fully.
Using the LCD Monitor
Get ready to take the photograph.
Load the batteries (
➲
Page 23) and the SmartMedia™ (
➲
Page 29) into the camera.
- 41 -
Photography (Auto Photography) (continued)
Set the mode dial to [ ].
Look at the image on the LCD monitor to compose the picture.
☞
To adjust the brightness of the LCD monitor
➲
Page 84
Press the shutter button down half way
1
, and press it down fully
2
.
• Pressing the shutter button down half way adjusts the exposure, and pressing the shutter button down fully takes the shot.
• When the focus and exposure are adjusted, the viewfinder lamp lights or blinks in green. (
➲
Page 39)
• If you shoot a picture, when preview is set to ON (
➲
Page 60), a preview image is displayed on screen for about two seconds.
• The viewfinder lamp turns red while image data is being recorded onto the SmartMedia™.
1
Press down half way.
2 Press down fully.
Memo
•The LCD monitor sometimes displays bright, dark or colored spots at all times. This is not a malfunction.
These spots do not appear in the photographed image.
•The image is not displayed on the LCD monitor while the shutter button is pressed down fully.
- 42 -