Appendix. Pentax Optio S4
Publicitate
Publicitate
Appendix
List of City Names
8
Refer to following list of city and code names for setting the world time..
Code
TYO Tokyo
GUM Guam
City names
SYD Sydney
NOU Noumea
WLG Wellington
AKL Auckland
PPG Pagopago
HNL Honolulu
ANC Anchorage
YVR Vancouver
YYC Calgary
DEN Denver
CHI Chicago
MIA Miami
YTO Toronto
Code City names
JNB Johannesburg
IST Instanbul
CAI Cairo
JRS Jerusalem
MOW Moscow
JED Jeddah
THR Tehran
DXB Dubai
KHI Karachi
KBL Kabul
MLE Male
DEL Delhi
CMB Colombo
KTM Kathmandu
DAC Dacca
RGN Rangoon
BKK Bangkok
VTE Vientiane
SIN Singapore SCL Santiago
CCS Caracas
YHZ Halifax SGN Ho Chi Minh
JKT Jakarta
MAD Madrid
LON London
PAR Paris
MIL Milano
ROM Rome
BER Berlin
PER Perth
BJS Beijing
SHA Shanghai
MNL Manila
TPE Taipei
SEL Seoul
ADL Adelaide
110
Optional Accessories
A number of dedicated accessories are available for this camera.
AC adapter D-AC8
USB Cable I-USB7
AV Cable I-AVC7
Camera Case O-CC8
Strap O-ST5
Remote control E
Remote control F
Rechargeable lithium-ion battery D-LI8
Battery charger D-BC8
8
111
Messages
8
Messages such as the following may be displayed on the LCD monitor during camera operation.
Memory Card full
Built-in Memory Full
No image & sound
The SD Memory Card / MultiMediaCard or the Builtin memory is full and no more images can be saved.
Insert a new SD Memory Card / MultiMediaCard or
Change the quality/size and try again. (p.92, p.94)
There are no images or sound on the SD Memory
Card / MultiMediaCard or in the Built-in memory.
Camera can not display this image & sound.
Battery depleted.
You are trying to play back an image in a format not supported by this camera. You may be able to display it on another brand of camera or PC.
The battery is exhausted. Recharge the battery or
replace with charged battery. (p.12)
Memory card error.
Shooting and playback are impossible due to a problem with SD Memory Card / MultiMediaCard.
Try displaying on a PC.
This card is not formatted.
The SD Memory Card / MultiMediaCard you have inserted is unformatted or has been formatted on a
PC or other device and is not compatible with this
Data being recorded. The image is being recorded on the SD Memory
Card / MultiMediaCard.
The protect setting or DPOF setting is being changed.
Formatting...
The SD Memory Card / MultiMediaCard or Built-in memory is being formatted.
112
Deleting
Image folder could not be created.
The image is being deleted.
The largest file number has been assigned to an image and no more images can be saved. Insert a new SD Memory Card / MultiMediaCard or format the SD Memory Card / MultiMediaCard or Built-in
Battery depleted, the image is not stored.
The battery is exhausted. The image you just captured has not been saved. Recharged the battery or replace with charged battery.
Compression error Compression of the image you captured has failed.
Change the recorded pixels or quality levels, and take a picture again.
Data being recorded The movie picture is being recorded.
Protect all images & sounds
Alarm was set
The image you are trying to delete is a protected image.
The alarm has been enabled.
8
113
Troubleshooting
8
Problem
Power will not come on
Cause
Battery is not installed
Remedy
Check battery is installed.
If not, install battery.
Battery is installed incorrectly
Check orientation of battery.
Reinsert battery with (
2
) symbol
towards back of camera. (p.13)
Battery power is low Insert a charged battery or use the
AC adapter.
No image on the LCD monitor
LCD monitor is set to
OFF
Image is displayed but is hard to see
Press Display button to turn LCD
Image on LCD monitor may be hard to see when taking pictures outside in sunlight.
Shutter will not release
Flash is charging
No available space on SD Memory Card /
MultiMediaCard or in
Built-in memory
Recording
Picture is dark Subject is too far away in a dark environment, such as a night scene.
When flash lamp blinks red, flash is charging and no pictures can be taken. Lamp lights red when charging is completed.
Insert SD Memory Card /
MultiMediaCard with available space
or delete unwanted images. (p.16,
Wait until recording is finished.
Picture becomes dark if subject is too far away. Take picture within range of flash.
Background is dark When taking a picture of a person against dark background, such as night scene, the person may appear dark if the flash does not reach background even with correct exposure. Set to
B
mode to ensure both person and background are
114
Problem
Subject is not in focus
Flash does not discharge
Cause
Subject difficult to focus on
Remedy
Subjects difficult to focus on using autofocus: objects with little contrast
(blue sky, white walls, etc.), dark objects, finely patterned objects, fast-moving objects, scenery through window or net, etc. Lock focus on another object located at same distance (press shutter release button halfway), then aim at target and press shutter release button fully, or use Manual Focus mode.
Subject is not in focusing area
Position subject in AF frame
(focusing area) in middle of LCD monitor. If the subject is outside the focusing area, aim the camera at the subject and lock the focus (press shutter release button halfway), then compose picture and press the shutter release button fully.
Subject is too close Set focus mode on q
(Macro) or r
Focus mode is set on q
(Macro) or r
(Super Macro).
Flash mode is set to
Off
The Capture mode is set to
C
, continuous shooting or infinitylandscape mode.
Normal pictures will be out of focus if taken with focus mode set on q
(Macro) or r
(Super Macro).
Set to Auto or b
Flash will not discharge in these modes.
8
115
Main Specifications
8
116
Type
Effective Pixels
Sensor
Fully automatic compact-type digital still camera with built-in zoom lens
4.0 megapixels
4.23 megapixels (total pixels), 1/2.5 inch interline transfer CCD with a primary color filter
Recorded Pixels
Sensitivity
File Format
Still 2304×1728 pixels, 1600×1200 pixels,
1024×768 pixels, 640×480 pixels
Movie picture 320×240 pixels
Auto, manual (Equivalent to ISO 50, 100, 200)
Still JPEG (Exif2.2), DCF, DPOF, PRINT Image Matching II
Movie
Sound
AVI (Open DML Motion JPEG), approx. 15 fps, with sound
WAV (ADPCM system), max. recording time 59 min. 46 sec. (when using a 16 MB SD Memory Card)
“Best”, “Better”, “Good” Quality Level
Storage Medium Built-in memory (approx. 11 MB), SD Memory Card / MultiMediaCard
(MMC)
Image Storage Capacity
Movie picture
(320×240)
Quality Level
Recorded Pixels
2304×1728
(
Best
C
)
5
1600×1200 11
1024×768 26
640×480 57
(
Better
D
)
9
20
47
89
Good
(
E
)
14
28
62
119
60 sec × 1
• When using a 16MB SD Memory Card
White Balance Auto, Daylight, Shade, Tungsten Light, Fluorescent light, Manual
Lens Focal Length 5.8 mm – 17.4 mm (Equivalent to 35 mm – 105 mm in 35 mm format)
Maximum Aperture f/2.6 – f/4.8
Digital Zoom
Viewfinder
Lens Composition 6 elements in 5 groups (two aspherical elements)
Zoom type
Picture Range
Electrically driven
39.5 mm×29.6 mm (screen is filled) (Super
Macro mode)
Lens Barrier
Capture Mode
Electrically driven
Max 4× (Combines with 3× optical zoom to give zoom magnification equivalent to 12×)
Real-image zoom viewfinder Type
Magnification
Diopter
Wide 0.28×, Tele 0.78×
-1 m
-1
(at 3 m)
LCD monitor 1.6 inch TFT color LCD with 84 kilopixels monitor (with backlight)
Playback Functions Single-frame, 9-frame index, enlargement (max. 4´), scroll, slideshow, movie playback, histogram display, image/sound copying, trimming, resizing
Focusing System Type TTL contrast detection system by sensor 7-point autofocus (Spot autofocus possible)
Focusing Range
(From lens front)
Normal: 0.4 m to infinity (full zoom range)
Macro: 0.18 m – 0.5 m (full zoom range)
Super macro: 0.06 m – 0.2 m (middle zoom position only)
Landscape: Infinity (full zoom range)
By half-pressing shutter release button
Manual Focus
Focus Lock
0.06 m to infinity
Exposure Mechanism AE Metering
Shooting Modes Standard, Picture, Night-Scene, Movie,
Panorama Assist, 3D, Digital Filter, USER
EV compensation ±2EV (Can be set in 1/3EV steps)
Movie
TTL metering by sensor (multi-segment, centerweighted, spot)
Recording time approx. 1 sec. – 1 min.,
Fast Fwd Movie: max. approx. 100 min.
Shutter
Flash
Type
Speed
Type
Flash Modes
Working Range
Electronic/mechanical shutter
Approx. 1/2000 sec. - 4 sec.
Auto flash with red-eye reduction function
Auto, Flash Off, Flash On, Auto + Red-eye
Reduction, Flash On + Red-eye Reduction
Wide: Approx. 0.2m-3.5m w/sensitivity at 200
Tele: Approx. 0.1m-2.0m w/sensitivity at 200
Drive Modes
Self-timer
Time function
Power Supply
Battery Life
Single-frame, Continuous, Remote Control, Self-timer
Electronic control type, delay time: approx. 10 sec.
World Time setting for 62 cities (28 time zones)
Rechargeable lithium-ion battery D-LI8, AC adapter (optional)
In/Out Port
Approx. 160 images (with LCD monitor on, flash fired for 50% of shots and using a rechargeable lithium-ion battery D-LI8, in accordance with
Pentax measuring conditions)
USB/AV terminal (PC communication type USB 1.1), external power supply terminal
Video Output format NTSC, PAL
Size 83 (W) × 52 (H) × 20 (D) mm
(excluding operating members and projections)
Mass 98g (excluding battery and SD Memory Card / MultiMediaCard)
Mass when shooting 113g (including battery and SD Memory Card / MultiMediaCard)
Accessories Rechargeable lithium-ion battery, 3D image viewer, USB cable, software (CD-ROM), AV cable, strap, operating manual
8
117
WARRANTY POLICY
8
All Pentax cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized Pentax service facilities.
Procedure During 12-month Warranty Period
Any Pentax which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the equipment or to the manufacturer. If there is no representatives of the manufacturer in your country, send the equipment to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your Pentax was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer's representatives in that country. Notwithstanding this, your Pentax returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer's authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.
118
• This warranty policy does not affect the customer's statutory rights.
• The local warranty policies available from Pentax distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
8
The CE Mark is a Directive conformity mark of the European
Community.
119
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
8
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian
Interference - Causing Equipment Regulations.
Pour les utilisateurs au Canada
Cet apareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
120
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We: PENTAX U.S.A., Inc.
Located at: 600 12
th
Street, Suite 300
Golden, Colorado 80401 U.S.A.
Phone: 303-799-8000 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein, complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR ¤2.909.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: PENTAX Digital Still Camera
Model Number: Optio S4
Contact person: Customer Service Manager
Date and Place: August, 2003, Colorado
PENTAX Corporation
2-36-9,Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.co.jp/)
PENTAX Europe GmbH (European Headquarters)
PENTAX U.K. Limited
PENTAX France S.A.S.
PENTAX Benelux B.V.
Julius-Vosseler-Strasse, 104, 22527 Hamburg, GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
12/14, rue Jean Poulmarch, 95106 Argenteuil Cedex, FRANCE
(for Netherlands)
Spinveld 25, 4815 HR Breda, NETHERLANDS
(http://www.pentax.nl)
(for Belgium & Luxembourg)
Weiveldlaan 3-5, 1930 Zaventem, BELGIUM
(http://www.pentax.be)
PENTAX (Schweiz) AG
Widenholzstrasse 1 Postfach 367 8305 Dietlikon, SWITZERLAND
(http://www.pentax.ch)
PENTAX Scandinavia AB
P.O. Box 650, 75127 Uppsala, SWEDEN
(http://www.pentax.se)
PENTAX U.S.A., Inc
600 12 th
Street, Suite 300
Golden, Colorado 80401, U.S.A.
(http://www.pentax.com)
PENTAX Canada Inc.
3131 Universal Drive, Mississauga, Ontario L4X 2E5,
CANADA
(http://www.pentaxcanada.ca)
• Printed on recycled paper
• Specifications and external dimensions are subject to change without notice.
57335 Copyright © PENTAX Corporation 2003
01-200308 Printed in Japan
Descarcă
Link public actualizat
Linkul public către chat-ul tău a fost actualizat. You may view and manage your chat links after registration here.
Link public document
Publicitate