- No category
advertisement
▼
Scroll to page 2
of
22
Operating instructions TD-16
ATTENTION
If the device is not correctly connected, this can lead to the failure or complete destruction of the device (and the connected load).
7.1 Power connection assignments
Plug connection Designation
Power
X10
Supply voltage
Mains output
Schuko plug
230 V AC 50 Hz
1: 230 V AC
2: 0 V
PE: PE
X11 Load 1: Load
Channel 1 2: Load
PE: PE
X12 Load 1: Load
Channel 2 2: Load
F1 Fuse
PE: PE
10 A, slow-blow
8 Dimensions
Page 20 Status as of 09/2012
advertisement
Related manuals
advertisement
Table of contents
- 6 PRODUCT OVERVIEW
- 6 Scope of delivery
- 6 Device versions
- 6 Properties
- 6 General
- 6 Output data
- 6 Inputs
- 6 Outputs
- 7 SAFETY INFORMATION
- 7 Intended use
- 7 Basic safety information
- 7 Transport and storage
- 8 INSTALLATION
- 8 Hardware installation
- 8 Mains connection
- 8 Oscillating conveyor connection
- 8 Fuse protection
- 9 OPERATION
- 9 Explanation of the button and display fields
- 10 Description of the user levels
- 10 Structure tree, main menu
- 10 Structure tree, channel menus 1 and
- 11 Starting level
- 12 User level, channels
- 13 Menu description
- 13 Main menu
- 14 Sensor menu
- 15 Actuator menu
- 16 Enable menu
- 17 Ramp menu
- 17 Error display
- 17 Overtemperature
- 18 DESCRIPTION OF THE CONTROL I/OS
- 18 Operating status
- 18 Enable input
- 18 Sensor input
- 19 TECHNICAL DATA
- 20 TERMINAL ASSIGNMENTS
- 20 Power connection assignments
- 20 DIMENSIONS
- 21 MAINTENANCE AND CARE
- 21 Regular tests
- 21 Decommissioning and disposal
- 22 ACCESSORIES AND OPTIONS
- 22 The plug connectors listed below are available as accessories
- 22 The connection lines listed below are available as accessories