User Manual

Specifications

External Power Supply

To avoid damaging the system we suggest using it only with the provided power supply, as it furnishes the correct supply to the iPower devices. An improper substitution of the power supply may cause the malfunctioning, the overheating and the damage of the entire system.

iPower Main Unit

The iPower device should be powered by the external regulator and controlled by the appropriate application. The two 1/4"audio jack outputs allow for two tattoo machines, even of different kind, to be connected at the same time.

The 1/4” audio jack input allows to connect an external pedal in case you don’t want to use the output voltage interruption function provided by the mobile application.

The device is also provided with a USB port that can be used to recharge your mobile device or to power other devices, such as small LED lamps, with USB connectors

Certification

The iPower product is certified according to the CE directive and marked according to the directive

&TTE,1999/5/EC.

Identification label

The device comes with an identification label, as shown in the following image.

Rev. 1.1 / 26.02.2015

pag. 7/11