advertisement
3.8.4
Date/Time Configuration*
You can use the tool we provide to modify the system time.
Click on the "Time Settings" icon on the screen. Then Advantech Date/Time Settings utility will be started.
Figure 3.7 Date/Time Settings
After the time is adjusted, please click “OK” button, and the date will be saved. Meanwhile, the RTC time will be synchronized to the time you just set.
3.8.5
About System
If you want to know the version information of this system, you can see it with the utility on App Launcher. Click on the “About System” icon on the screen, and you will see the version information of this system.
Figure 3.8 About System
Note!
This is an optional way to get version info under console. You can use
“version” command to achieve this as following: root@am335x-adv:~# version
Bsp version: RSB-4220 V1.000
Device name: RSB-4220
Release date: 2014-10-09
Kernel version: 3.2.0
51 RSB-4220 User Manual
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 8 Introduction
- 8 Specifications
- 8 Functional Specifications
- 9 Mechanical Specifications
- 9 Electrical Specifications
- 9 Environmental Specifications
- 9 Block Diagram
- 12 Jumpers
- 12 Jumper Description
- 12 Jumper List
- 12 Table 2.1: Jumper List
- 13 Jumper Settings
- 15 Connectors
- 15 Connector List
- 15 Connector Settings
- 16 Figure 2.1 miniPCIE
- 17 Figure 2.2 Debug Port
- 17 Figure 2.3 USB Type A connector
- 18 Figure 2.4 JTAG Pin header
- 20 Figure 2.5 Ethernet Connector
- 21 Figure 2.6 DC power Jack
- 21 Figure 2.7 Reset button
- 22 Figure 2.8 SD Slot
- 23 Figure 2.9 LVDS Connector
- 24 Figure 2.10LVDS Inverter Power Connector
- 25 Figure 2.112X20 pin Connector
- 26 Mechanical
- 26 Jumper and Connector Locations
- 26 Figure 2.12Jumper and Connector Layout (Top side)
- 26 Figure 2.13Jumpers and Connector Layout (Bottom Side)
- 26 Figure 2.14Coastline Layout
- 27 Board Dimensions
- 27 Figure 2.15Board Dimension Layout (Top Side)
- 27 Figure 2.16Board Dimension Layout (Bottom Side)
- 28 Figure 2.17Board Dimension Layout (Coastline)
- 28 Quick Start of RSB
- 28 Debug Port Connection
- 28 Debug Port Setting
- 28 Figure 2.18HyperTerminal Settings for Terminal Setup
- 29 Test Tools
- 29 eMMC Test
- 30 USB Test
- 30 SD Test
- 31 SPI Test
- 32 I2C Test
- 32 CAN Test
- 33 GPIO Test
- 33 LVDS Test
- 34 Mini-PCIe WIFI Test
- 35 2.5.10 LAN Test
- 37 2.5.11 RS232 Test
- 39 2.5.12 Watchdog Timer Test
- 42 Introduction
- 42 Package Content
- 42 Pre-built System Image
- 42 Source Code Package
- 43 Figure 3.1 Source code package structure
- 44 Figure 3.2 image\rootfs
- 46 Set up Build Environment
- 46 setenv.sh
- 47 Build Instructions
- 47 Build u-boot Image
- 47 Build Linux Kernel Image
- 47 Build Log
- 48 Kernel Source Code Modification
- 48 Add a Driver to Kernel by menuconfig
- 48 Figure 3.3 Linux Kernel Configuration
- 49 Figure 3.4 Selecting TI TPS65910 RTC Driver
- 50 Create a Linux System Boot Media
- 50 Storage Information (eMMC/SD card)
- 50 Create a Linux System SD Card
- 51 Boot from Onboard Flash
- 51 Debug Message
- 51 Figure 3.5 HyperTerminal Settings for Serial Console Setup
- 52 Linux System Configuration and Use
- 52 Display Output Setting
- 54 Service Configuration
- 56 Network configuration
- 56 Figure 3.6 IP Configuration
- 57 Date/Time Configuration
- 57 Figure 3.7 Date/Time Settings
- 57 About System
- 57 Figure 3.8 About System
- 58 Brightness Control
- 58 Figure 3.9 Brightness Control
- 58 Serial Tools
- 58 Figure 3.10Serial Control
- 59 Matrix GUI User’s Guide
- 59 Figure 3.11Matrix
- 60 Screen Rotation for Qt Application
- 61 3.8.10 Add a Startup items when boot
- 61 3.8.11 Package online install
- 62 Development Guide and Reference
- 62 Development of C/C++ Programs
- 63 Development of GUI Programs with QT Library
- 63 Demo program source code
- 68 System Recovery
- 70 RISC Design-in Services
- 72 Contact Information
- 73 Global Service Policy
- 73 Warranty Policy
- 74 Repair Process