Printer Output is Banding (Vertical). ENCAD T-200

CadJet T-200 Service Manual

Table 4-1. Troubleshooting Table (cont).

Symptoms Possible cause

Printer Output is • corrupted

Banding (Horizontal) NVRAM

(cont)

• carriage head height incorrect

Solution clear NVRAM check carriage head height and perform calibrations

• incompatable or replace memory defective memory module module

Printer Output is Banding

(Vertical)

• dirty carriage bushings clean bushings

• defective carriage replace bushings bushings

• trailing cable connections

• faulty trailing cable reseat trailing cable replace trailing cable check lower roller • lower roller height incorrect

• dirty encoder strip clean encoder strip

• defective encoder replace encoder strip strip

Troubleshooting 4-11