7. Technical Specifications

This section provides the specifications of the 3-slot intelligent chassis switch as the table shown below.

Standard

IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX/100BASE-FX

IEEE802.3z Gigabit SX/LX

IEE802.3ab Gigabit 1000T

IEEE802.3x Flow Control and Back pressure

IEEE802.3ad Port trunk with LACP

IEEE802.1d Spanning tree protocol

IEEE802.1w Rapid Spanning tree protocol

IEEE802.1p Class of service

IEEE802.1q VLAN Tagging

IEEE802.1x User authentication

Switch Architecture

Back Plane

LED Indicators

Store and forward switch architecture.

8.8Gbps

System Power (Green )

8 10/100TX module: Link/Activity (Green), Full duplex/collision (Yellow)

8 100Base-FX module: Link (Green)/Activity (Green

Blinking)

8 100SFP module: Link (Green)/Activity (Green

Blinking)

Gigabit Copper: Link/Activity (Green), 1000Mbps

(Green), 100Mbps (Green), Full duplex/collision

93

Connector

Expansion Module

MAC Address

Packet Buffer

Flash ROM

DRAM

Jumbo Frame

Power Consumption

Dimensions

Power Supply

(Yellow)

MINI GBIC: Link/Activity(Green), 1000Mbps (Green)

RS-232 console: 1 x DB-9 female

10/100TX module: 8 x RJ-45

100FX (Multi /Single Mode) module: 8 x SC

100SFP module: 8 x SFP

Gigabit Copper + Mini-GBIC Combo: 2 x RJ-45 + 2 x

Mini-GBIC

 8 port 10/100TX module with RJ-45 connector

 8 port 100Mbps multi mode fiber module with SC connector

 8 port 100Mbps single mode fiber module with SC connector

 8 port 100Mbps SFP module

8K-entry

4Mbits

4Mbytes

16Mbytes

9022bytes (only for Gigabit ports)

50Watts (Maximum)

440mm (W) x 44mm (H) x 280mm (D)

100~240V

AC

, 50 /60Hz, 0.8A (maximum)

94

Ventilation

Operating Temp.

Storage Temp.

EMI

Safety

Redundant Power: DC 12 ~ 48V

2 x DC cooling fans with auto-detect function

-0℃~45℃, 5%~95%RH

-40℃~70℃, 5% ~ 95% RH

FCC Class A, CE

UL, cUL, CE/EN60950-1

95