- No category
advertisement
Preliminary User's Manual l TQMLS102xA UM 0002 l © 2015 TQ-Group Page 17
3.2.6 Deep Sleep
Deep Sleep is an especially efficient energy-saving mode (LPM35), a variation of the LPM20, with which parts of the Core Supply are switched off.
The transition into Deep Sleep is a complicated multistage process, which is partly controlled by software, and partly by a CPUinternal State Machine, which also has to be configured by software.
Note: Supply PROG_SFP
The supply PROG_SFP is exclusively required to program the Security Fuses. In case it is used, a suitable switchable supply must be provided on the carrier board for this special use case.
3.3 DDR3L SDRAM
The maximum memory size is 2 Gbyte, plus ECC. 1 Gbyte is assembled by default, plus ECC.
The LS102x CPU provides the following DDR features:
DDR3L memory interface
Data bus width 32-/36 Bit incl. ECC (LS1022 16Bit + ECC)
There are the following options:
2 × 8 Gbit = 2 Gbyte + ECC
2 × 4 Gbit = 1 Gbyte + ECC
2 × 2 Gbit = 512 Mbyte + ECC
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 About this manual
- 6 Copyright and licence expenses
- 6 Registered trademarks
- 6 Disclaimer
- 6 Imprint
- 7 Tips on safety
- 7 Symbols and typographic conventions
- 7 Handling and ESD tips
- 8 Naming of signals
- 8 Further applicable documents / presumed knowledge
- 9 Brief description
- 10 Key functions and characteristics
- 10 Available versions
- 11 Electronics Specification
- 11 System overview
- 11 System architecture / block diagram
- 12 System components
- 12 CPU LS102xA
- 12 CPU versions
- 16 Boot options
- 18 Multiplexing
- 19 Pinout connectors
- 21 JTAG interface
- 22 Deep Sleep
- 22 DDR3L SDRAM
- 23 On-board flash
- 23 Reset structure
- 24 Housekeeping
- 24 Overview
- 26 Temperature supervision
- 28 EEPROM
- 28 Power supply
- 28 Power estimation
- 28 External interfaces
- 28 SERDES
- 29 Mechanics
- 29 Connectors
- 29 TQMLS102xA image
- 30 Adaptation to the environment
- 30 Protection against external effects
- 30 Thermal management
- 30 Structural requirements
- 30 Notes of treatment
- 31 Technical data
- 31 Vibration load
- 31 Shock load
- 31 Software
- 32 Safety requirements and protective regulations
- 33 Operational safety and personal security
- 33 Climatic and operational conditions
- 33 Reliability and service life
- 33 Environment protection
- 33 REACH
- 34 Battery
- 34 Other entries
- 35 Appendix
- 35 Acronyms and definitions
- 36 References