Cleaning the Print Head. Canon BJC-4400 Series, BJC-4400

Printing the Test Pages Using the Operator Panel

To print a test page, make sure the printer is turned off and paper is loaded.

❍ Press and hold the

POWER

button until you hear the number of beeps that correspond to the test page you want to print.

Test page

Demonstration

Status Information

Test A

Nozzle Test

Number of beeps

1

2

3

4

❍ When you release the

POWER

button, the test page starts to print.

Cleaning the Print Head

Your printer is equipped with a print head cleaning function to ensure constant high quality printing.

Cleaning the Print Head From Windows

If you are using Windows, you can execute print head cleaning from the

Control sheet in the printer driver. Simply click on Clean Ink Head.

CLICK HERE

4-6 Maintaining the Printer

Chapter 4

Cleaning the Print Head Using the Operator Panel

If you want to clean the print head from the operator panel, follow these steps:

Make sure the printer is turned on.

❍ Make sure the green

POWER light is on.

Press and hold the

RESUME button for at least two seconds until the printer beeps twice.

❍ The

POWER light will blink for several seconds while the print head is being cleaned.

POWER LIGHT

N

❍

Perform the print head cleaning only when you encounter a print quality problem. Unnecessary and repetitious cleaning will waste ink.

❍ If you execute the print head cleaning while paper is manually loaded, the printer will eject the paper and then perform the cleaning.

Chapter 4

Maintaining the Printer 4-7