Deactivation of the voice commands function. Navigon 70 Premium, 70 PREMIUM LIVE, 70 PLUS TRAFIC

User’s manual NAVIGON 70 Plus | 70 Premium | 70 Premium Live

The positive acknowledgement tone sounds (two high-pitch tones) and the function is executed.

If the navigation system has not understood your instruction or if you do not say anything within a certain time, the negative acknowledgement tone (two short low-pitch tones) will sound.

►

Say the command again.

If the navigation system has not understood you after several repetitions, the prompt "Say Help" will appear.

Note: Navigation instructions and warnings are muted for as long as the navigation device expects to receive voice commands from you.

5.3 Help

Say only "Help" if you want to know which voice commands are currently possible. In nearly all windows in which voice commands are supported the navigation system will then tell you which commands you can say in the current window.

5.4

5.5

Deactivation of the voice commands function

The voice commands function will be deactivated under the following conditions:

►

If you operate the navigation device with your finger while a voice command is expected from you.

►

If a call is received and during an active phone call if the navigation device is being used as a hands-free module.

Configuring the voice commands function

You can configure for which tasks you want to use voice commands.

►

In the N

AVIGATION

window tap on Options > Settings > General >

Use Voice Command.

Select the tasks for which you want to use Voice Command:

►

Complete: You can use all the voice command functions.

►

►

Answering: You can enter addresses and answer questions asked by the navigation device.

Entering Addresses: You can enter only addresses with the voice command function.

Note: For details of how to enter a destination using voice commands

refer to the chapter "Entering a destination by voice commands" on page 32.

- 28 - Voice Command