advertisement
MANUAL
TTX 300/COBRA Offline
Floppy
Programming level:
PRINT DESIGN
<F1> auxiliary texts and explanations
FLOPPY MISC PARA PASSWD
PRNDIR
Listing of
-
Design
-
Logos free capacity
PRNTID
Listing of
-
ID – numbers
COPY
COPY
- disc to disc
FORMAT
FORMAT at disc
All data will be cleared.
05/02 Rev. 1.12
73
MANUAL
TTX 300/COBRA Offline
Listing of masks and logos - PRNDIR
A listing of all masks and logos stored on the inserted floppy disk is prepared, which facilitates management and control of already existing designations.
DESIGNS - masks, generated in the MVTIII mode < MASKNAME.LBL> with information to mask name data, occupied storage space in byte, information on the material(punched / endless, width * length) and the number of fields within the mask.
LOGOS - blocks, available in the Easy Plug format < LOGONAME.EPT > listed with name and occupied storage space.
EASYPLUG FILES - files, generated in the Easy Plug mode < FILENAME.EPF > with information to file name data and occupied storage space.
..... BYTES FREE - The storage capacity still available on the disk.
NOTE: Exclusively files stored in the Easy Plug format are listed.
Selection and Start
Select desired menu item in accordance with root menu.
By cursor keys <
← →
> for horizontal movement and <
↑ ↓
> for vertical movement
Start printout by key <
↓
> or < ENTER >
The listing is printed out.
The display returns to the main menu.
Note
If the message: DRIVE NOT READY is displayed, insert floppy disk into drive and acknowledge message by < ENTER > before re selection .
This listing is placed on the last position within a series of print jobs.
The printer must be in the active mode!
05/02 Rev. 1.12
74
MANUAL
TTX 300/COBRA Offline
Listing of ID numbers – PRNTID
A listing of all ident numbers stored in a ident file is prepared, which facilitates management and control of already existing designations.
This listing contains name data of the ident file and the ident numbers. If the mask which is base to the ident field contains more ident fields, also these files with the ident numbers will be listed accordingly.
NOTE: Exclusively mask and logo files stored in the Easy Plug format are listed.
Selection and Start
Select desired menu item in accordance with root menu:
By cursor keys <
← →
> for horizontal movement and <
↑ ↓
> for vertical movement
Start function by key <
↓
> or < ENTER >
Display
MASKNAME:......................
After entry of mask name start printout by key <
↓
> or < ENTER >
The listing is printed out.
The display returns to the main menu.
NOTE: If the message: DRIVE NOT READY is displayed, insert floppy disk into drive and acknowledge message by < ENTER > before re selection.
This listing is placed on the last position within a series of print jobs.
The printer must be in the active mode!
05/02 Rev. 1.12
75
MANUAL
TTX 300/COBRA Offline
Copying of discs – COPY
Data can be copied from one floppy disk to another one in the 1:1 mode. All data stored on a source disk are copied in several steps. The data on the source disk are preserved, while those on the destination disk are overwritten.
Floppy disk format: 3.5 “; 1.44 MB; High Density;
Selection and Start
Select desired menu item in accordance with root menu.
By cursor keys <
← →
> for horizontal movement and <
↑ ↓
> for vertical movement
Start printout by key <
↓
> or < ENTER >
A
Display INSERT SOURCE DISK Insert source disk
Depress < ENTER > Display
The data are loaded, after termination of process:
B
Display INSERT DESTINATION DISK
XX KB READ
Insert destination disk
Depress < ENTER > Display XX KB WRITTEN
The data are transmitted to the destination disk, after termination of process:
Display INSERT DESTINATION DISK Ahead by steps A and B
The display returns to the main menu after termination of the last intermediate step.
NOTE: Do not confuse source and destination disk!!!
05/02
If the message: DRIVE NOT READY is displayed, insert floppy disk into drive and acknowledge message by < ENTER > before re selection.
Rev. 1.12
76
MANUAL
TTX 300/COBRA Offline
Formatting of Floppy Disk - FORMAT
Floppy disks can be formatted.
Floppy disk need to have the following specification:
3.5 “; 1.44 MB; High Density;
Selection
Select desired menu item in accordance with root menu.
By cursor keys <
← →
> for horizontal movement and <
↑ ↓
> for vertical movement
Start
Insert disk
Start procedure by key <
↓
> or < ENTER >
Display
FORMAT DISK Y/N
to the
<Y> The operation will be started, the display counts corresponding formatted sectors (0-max)
Display:
Formatting TRACK XX
<N> Termination of process
The display returns to the main menu after end of formatting resp. termination of process.
NOTE
05/02
If the message: DRIVE NOT READY is displayed, insert floppy disk into drive and acknowledge message by < ENTER > before re selection.
Rev. 1.12
77
advertisement
Related manuals
advertisement
Table of contents
- 6 Setup
- 6 General notes
- 6 Overview
- 7 Unpacking the printer
- 7 Setting and connecting of printer
- 7 Keyboard
- 7 Serial interface connection
- 8 Card slot
- 9 Inserting the thermal transfer ribbon
- 10 Inserting the label material
- 11 Narrow material web adjustment
- 12 Removal of material and ribbon
- 12 Introduction
- 13 Programming Level
- 13 Printer Operating Level
- 14 Operation
- 14 Adjustment of DIP switches
- 14 Adjustment of print head temperature
- 15 Start as OFFLINE Unit
- 16 Start as ONLINE Unit
- 17 Insertion or removal of Floppy Disk
- 18 Special Functions
- 18 <CTRL+C>
- 18 <CTRL+A>
- 18 <CTRL+P>
- 18 <ALT+CTRL+DEL>
- 19 Main Menu
- 20 MENU: DESIGN
- 20 MENU: PRINT
- 21 MENU: FLOPPY
- 21 MENU: MISC
- 21 MENU: PARA
- 21 MENU: PASSWD
- 22 Selection of menu items
- 22 Selection
- 22 Adjustment
- 22 Quit Menu
- 23 Input and select functions
- 23 Menu items with preset options
- 23 Menu items with freely definable adjustments
- 23 Editing Functions
- 24 Special notes on data input
- 25 Menu Print
- 25 Document printout
- 26 Functions in the Menu: PRINT
- 26 Storing of variable data
- 27 Data Input
- 28 Quantity Specification
- 28 Start of Print Series
- 29 Selection of Slave Printer
- 30 Ident Number Management
- 30 Input of Ident Number Contents (Data Records)
- 31 Storage, Modification, Deletion, or Printout of Ident Numbers
- 33 Menu Design
- 35 Generation and Modification of Masks
- 36 Field-Editing Functions
- 37 Storage masks
- 37 SAVE Storage of mask contents under same name
- 38 NEWD Storage of mask contents under new name.
- 38 CANC Cancellation of modifications
- 38 Mask Names MASKNAME
- 39 Selection of printer PRINTER
- 40 Label width and length / material type
- 40 Width and Length
- 40 Material Type
- 41 Punch Offset PUNCHOFF
- 41 Length of Punch PUNCHLEN
- 42 Print series mode PRNTMODE
- 42 Number of cuts CUT
- 43 Relokative positioning X-RELOC / Y-RELOC
- 43 X-RELOC Offset transversally to the material
- 43 Y-RELOC Offset in feeding direction
- 44 Change Label CHNGLAB
- 44 Field Name FLDNAM
- 45 Character Set FONTNR
- 47 Position of field XPOS, YPOS
- 47 Direction of rotation of field DIRECT
- 48 Field type
- 48 NF - Normal Field
- 48 FT - Fixed Text Field
- 48 ID - Ident Field
- 48 NR - Number Field
- 48 NZ - Number Counter
- 48 DW - Data Repetition Field
- 48 RF - Computational Field
- 48 RC - Real Time Field
- 49 Field length FLDLEN
- 49 Justification JUSTIF
- 50 Character factor XSCAL / YSCAL
- 50 Selection of italic style ITALIC
- 50 Selection of inverse print INVERSE
- 51 Test printout
- 52 Normal Field -NF
- 53 Fixed Text Œ FT
- 54 Ident Field - ID
- 54 Set Up of Mask (Menu DESIGN) and File (Menu PRINT)
- 56 Input of Ident Number Contents (Data Records)
- 56 Storage, Modification, Deletion, and Printout of Ident Numbers
- 59 Sequence field - NR
- 60 Number Counter Field - NZ
- 60 Data repetition field - DW
- 64 Computational Field - RF
- 64 Functional Syntax of RF-Data (Term. FUNCT)
- 68 Real Time Field - RC
- 68 Syntax of Real Time Data
- 69 Individual Month names ‹S
- 71 Deletion of Masks Œ DELETE
- 72 Copying of Masks - COPY
- 73 Floppy
- 74 Listing of masks and logos - PRNDIR
- 75 Listing of ID numbers Œ PRNTID
- 76 Copying of discs Œ COPY
- 77 Formatting of Floppy Disk - FORMAT
- 78 MISC
- 79 Parameter Printout - PARA
- 79 Contents of Logo Buffer - LOGO
- 80 Punch recognition Test printout Œ PUNCH
- 80 Font library Œ FONTS
- 81 Service Parameter - SERV
- 81 DOT1 and DOT2
- 82 Disc check Œ DISCCK
- 83 Ram test without RAM cards - DRAM
- 84 Check of sensor Œ SENS
- 85 TESTPRINT - PRINT
- 86 Test RAM cards Œ CARD
- 87 Formatting of RAM Card Œ CARDIN
- 88 Downloading of fonts / logos Œ DOWNLD
- 89 Parameters
- 90 Printing Speed - PRNTSPEED
- 91 Feeding Speed without print Œ SLEWSPEED
- 92 Headpower - Heatcontrol
- 92 Thermal / Thermal - Transfer Print - FOILMODE
- 93 Material type Œ MATERIAL
- 94 Material length Œ MATLENGTH
- 95 Material width Œ MATWIDTH
- 96 Punch Offset Œ PUNCHOFFS
- 98 Material light barrier Œ REFLEXSEN
- 99 Single start (optional) Œ SINGLESRT
- 100 National Character sets - NATIONAL
- 101 Characters - specific to language
- 102 Multilingual character set
- 103 Variation of barcode height Œ BARCODMUL
- 104 Spooler size Œ SPOLSIZE
- 105 Transmission speed Œ BAUDRATE
- 106 Parity - PARITY
- 107 Number of stop bits Œ STOPBIT
- 108 Number of data bit Œ DATABIT
- 109 Transmission synchronisation Œ HANDSHAKE
- 110 Adjustment of parameters to factory setting Œ FACTORYINIT
- 111 Material end recognition - MATEND
- 112 Real time clock Œ CLOCK
- 113 Password
- 113 Password - PASSWD
- 115 Status messages
- 115 Status messages in the ONLINE mode
- 115 SINGLE START Œ 03
- 115 NO MATERIAL Œ 05
- 115 OVERHEAT Œ 06
- 115 FOIL END Œ 07
- 116 NO PUNCH FOUND Œ 08
- 116 ROLL OPEN Œ 09
- 117 Status messages on connection
- 117 EEPROM ERROR - 01
- 117 RAMCHKSUM Œ 10
- 117 ALLOCATION - 60
- 117 Status messages conditional on EASY PLUG
- 117 IMMEDIATE COM Œ 20
- 118 FORMAT COMMAND Œ 21
- 118 NO #ER COMMAND Œ 22
- 118 INVALID COMMAND Œ 23
- 118 LABEL SIZE Œ 26
- 118 RANGE OVERFLOW - 27
- 118 CHARSIZE - 28
- 118 LOGO NUMBER Œ 29
- 119 LOGO BUFFER - 30
- 119 USED LOGO - 31
- 119 RS232 ERROR Œ 24
- 119 BUFFER OVERFLOW Œ 25
- 120 Status messages relating to disk drive
- 120 FILENAME NOT FOUND Œ 70
- 120 DISK WRITE PROTECTED Œ 71
- 120 DIRECTORY FULL / DISK FULL Œ 72
- 120 DRIVE NOT READY Œ 73
- 121 NO ANSWER FROM FDC Œ 74
- 121 DISK NOT USEABLE Œ 75
- 121 TOO MANY FILES OPEN Œ 76
- 121 FDC OPERATIO ABORT Œ 77
- 121 DISK ERROR Œ 78
- 121 BAD DISK SECTORS Œ 79
- 122 DISK DATA ERROR Œ 80
- 123 Data exchange
- 123 Data exchange between printer and MVT III
- 124 Maintenance
- 124 Overview
- 124 Changing and cleaning the print head
- 125 Cleaning the feed roller
- 125 Cleaning the gap sensor
- 125 Cleaning the material and ribbon guides
- 125 Tag / Label material
- 125 Ribbon
- 126 Service
- 126 Rear housing
- 126 Dismount Mechanics / Electronics from base plate
- 126 Dismount inner, vertical base plate
- 128 Remove board
- 128 Transformer
- 129 Power supply (input filter)
- 129 Fuses of power supply and board
- 130 Gap / Material Sensor
- 130 Sensor / Ribbon unwinder
- 131 Micro switch / print head pressure lever
- 131 Motor, round belt and feed roller
- 132 Print head
- 133 Print head mounting and adjustment
- 133 Head pressure
- 134 Ribbon un- and rewind
- 134 Brake value of ribbon unwind
- 134 Sensor check routine - OFFLINE
- 134 Gap sensor low Œ high power
- 134 Foil end sensor
- 135 Gap reflex sensor
- 135 Single Start Sensor
- 135 Optional Sensor
- 136 Assembling Accessory
- 136 Single Start Switch
- 137 Real-time clock
- 138 Reflex sensor
- 140 Appendix
- 140 Option: Rewinder
- 141 Option: Dispenser
- 142 Dispenser threading detail
- 143 DOT 1 and DOT2 printout
- 144 Bar codes, Lines
- 146 Technical Specification
- 148 Wiring
- 150 Diagram
- 151 Components
- 157 Index