User / Service - Avery Dennison

MANUAL

TTX 300/COBRA Offline

Data exchange

Data exchange between printer and MVT III

Data can be exchanged between the printer and the software program MVT III.

This is possible if the printer is not directly selectable from the computer and these data are available on floppy disk.

Masks generated on the MVT III can be processed on the printer under certain conditions.

Procedure - Conditions

The mask to be processed on the printer is to be checked for its compatibility with the same before storage on floppy disk in the MVT III.

In the MVT III the mask must be adapted upon its Generation to the performance characteristics of the printer model on which the labels are intended to print (this is automatically ensured if this printer is selected during mask set up).

Masks with date field, matrix field, line, and column, field: sum document are not supported by the printer. These fields, 4 contained in masks, must be eliminated, or the function of these fields is suppressed, i.e. they are reset to normal fields; correct results cannot be warranted in this case.

There is, however, also the possibility to process masks generated on a OFFLINF: printer models (TTX 736 / 739) on a ONLINE printer model (TTX 706 / 709 or TTX 600) by the MVT

III program.

05/02 Rev. 1.12

123