Initialization and de-initialization functions. STMicroelectronics STM32F4

UM1725



__HAL_DAC_GET_FLAG: Get the selected DAC's flag status

You can refer to the DAC HAL driver header file for more useful macros

12.3.3 Initialization and de-initialization functions

This section provides functions allowing to:



Initialize and configure the DAC.



De-initialize the DAC.

This section contains the following APIs:



HAL_DAC_Init()



HAL_DAC_DeInit()



HAL_DAC_MspInit()



HAL_DAC_MspDeInit()

12.3.4 IO operation functions

This section provides functions allowing to:



Start conversion.



Stop conversion.



Start conversion and enable DMA transfer.



Stop conversion and disable DMA transfer.



Get result of conversion.

This section contains the following APIs:



HAL_DAC_Start()



HAL_DAC_Stop()



HAL_DAC_Start_DMA()



HAL_DAC_Stop_DMA()



HAL_DAC_GetValue()



HAL_DAC_IRQHandler()



HAL_DAC_ConvCpltCallbackCh1()





HAL_DAC_ConvHalfCpltCallbackCh1()

HAL_DAC_ErrorCallbackCh1()



HAL_DAC_DMAUnderrunCallbackCh1()

12.3.5 Peripheral Control functions

This section provides functions allowing to:



Configure channels.



Set the specified data holding register value for DAC channel.

This section contains the following APIs:



HAL_DAC_ConfigChannel()



HAL_DAC_SetValue()

12.3.6 Peripheral State and Errors functions

This subsection provides functions allowing to

DOCID025834 Rev 3 213/963