JVC KD-R606 User Guide Manual

Direct dialing:

1 Select “NUMBER.”

2 Select a number.

3

Move to the next (or previous) number position.

Using the Bluetooth audio player

Select “BT-AUDIO.”

If playback does not start, operate the Bluetooth audio player to start playback.

• Operate the Bluetooth audio player to pause (if playback does not pause when you change the source).

Reverse skip/forward skip

4

Repeat steps

2

and

3

until you finish entering the phone number.

5

Pause/start playback*

Enter the Bluetooth menu (see page 22)

Voice dialing:

1

Select “VOICE DIAL.”

“SAY NAME” appears on the display.

2

Speak the name you want to call.

• If your cellular phone does not support the voice recognition system, “ERROR” appears on the display.

• Using “VOICE DIAL” may be difficult in a noisy environment or during an emergency.

*

Operation may be different according to the connected

Bluetooth audio player.

• Refer also to page 13 for connecting/disconnecting/ deleting a registered device.

• If the sound is stopped or interrupted while using a

Bluetooth device, turn off, and turn on the unit again to restore the sound.

If this does not work, reconnect the device (see page

13).

Bluetooth Information:

If you wish to receive more information about

Bluetooth, visit the following JVC web site:

<http://www.jvc.co.jp/english/car/> (English website only)

Downloaded from Caradio-Manual.com Manuals

EXTERNAL DEVICES

15