advertisement
Safety hints BASIC1 - User manual
3.5
3.6
Transport, storage, disposal
Transport
The customer bears the responsibility for the in-house transport of the
MSC IPC and has to provide for the compliance of the safety and accident prevention rules.
Advance of device only in the original packing.
Storage
An inappropriate storage can cause defects.
Consider the ambient conditions under "Technical data".
Disposal
Electronic parts to be disposed load the environment.
Hand the components on to a specialised company, responsible for the recycling of electrotechnical material, in order to avoid a load of our environment. This applies in particular for batteries and accumulators.
Please do not dispose in any case about the dustbin!
Installation, start-up, maintenance
Important information:
•
Only trained specialists may carry out installation, start-up and maintenance.
•
In case of storage in cold environment formation of condensation could occur. Device must be completely dry before start-up !
•
With start-up and operation the ambient conditions (Temperature, air humidity, etc.) of the device have to be considered for a safe operation.
•
Spare parts/Extensions/Accessories:
Only by MSC TUTTLINGEN GMBH recommended parts can be used. In case of use of other components the guarantee is dropped on the part of MSC TUTTLINGEN GMBH.
Page 14 of 100 Rev. 2.00 of 28.5.2002
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 Basic notes on handling and operation
- 8 Characteristics
- 8 Features
- 9 Nomenclature
- 10 Basic equipment
- 10 Options
- 11 Safety hints
- 11 Symbol and reference explanation
- 12 Safety standards and determination
- 12 Dangers
- 12 Electric hazards
- 13 Mechanical hazards
- 14 Operating and service personnel
- 14 Consider hints
- 14 Obligation
- 14 Qualification
- 15 Transport, storage, disposal
- 15 Installation, start-up, maintenance
- 16 Cleaning
- 16 Suitable fire extinguishing agents
- 17 Technical data
- 17 General
- 19 Mechanical measurements
- 20 Installation
- 20 Unpacking MSC IPC and testing scope of delivery
- 20 Unpacking
- 20 Scope of delivery
- 21 Mounting Conditions
- 21 Environmental conditions
- 21 Ventilation
- 22 Mounting situation
- 24 Fixing
- 24 Accessories
- 24 Mounting
- 24 Connection of the peripherals
- 24 Safety
- 25 External connections and interfaces
- 28 Connecting supply distribution
- 29 Putting into Operation
- 29 Functional elements
- 30 Switch-on of the current supply
- 30 Conditions
- 30 To boot the computer
- 30 Software installation
- 30 Installation of the operating system
- 30 Installation of the periphery drivers
- 35 Data back-up
- 36 BIOS Setup
- 36 Hints for BIOS-Setup
- 36 Calling BIOS-Setup
- 37 Setup Main Menue
- 39 Standard CMOS Setup
- 41 BIOS Features Setup
- 45 Chipset Features Setup
- 48 Power Management Setup
- 51 PNP/PCI Configuration
- 54 Integrated Peripherals
- 60 MicroDesign Features Setup
- 62 Software Interfaces
- 62 Address Overview System Memory
- 63 Interrupts (IRQ)
- 64 System expansions/Alterations
- 64 Safety
- 64 Open housing
- 65 Installation of a slot card
- 66 Install Memory Module
- 67 Install field bus module (Hilscher)
- 69 Fault diagnosis
- 69 General references
- 69 General errors, cause, remedy
- 71 Maintenance/Repair of the MSC IPC
- 71 Safety
- 71 Cleaning
- 71 General Hints
- 71 Cleaning of fan filter mat
- 72 Replace device fan
- 73 Replace CPU fan
- 74 Replace system battery
- 76 Spare parts
- 76 Questions to the manufacturer, user questions
- 76 Contact
- 76 Data for calling
- 76 Current Drivers and Tools