advertisement
BASIC1 - User manual System expansions/Alterations
9
9.1
System expansions/Alterations
Safety
Works on MSC IPC may only be done by an elektrospecialist!
When working on MSC IPC the device has to be disconnected from the supply net – disconnect power plug!
When handling static-vulnerable components the ESD protective measures have to be considered.
9.2
Absolutely consider the notes on safety in the section 'safety' of this manual.
Open housing
• ‚
Fig. 9-1: Open housing
ð Loosen fixing screws of the right or left housing cover (see arrows, (1)).
ð Put a screwdriver into the centre hole of the metal extension of the housing cover (2) and turn the screwdriver about 90 degrees clockwise. Lift the cover and remove it cautiously.
Rev. 2.00 of 28.5.2002 Page 63 of 100
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 Basic notes on handling and operation
- 8 Characteristics
- 8 Features
- 9 Nomenclature
- 10 Basic equipment
- 10 Options
- 11 Safety hints
- 11 Symbol and reference explanation
- 12 Safety standards and determination
- 12 Dangers
- 12 Electric hazards
- 13 Mechanical hazards
- 14 Operating and service personnel
- 14 Consider hints
- 14 Obligation
- 14 Qualification
- 15 Transport, storage, disposal
- 15 Installation, start-up, maintenance
- 16 Cleaning
- 16 Suitable fire extinguishing agents
- 17 Technical data
- 17 General
- 19 Mechanical measurements
- 20 Installation
- 20 Unpacking MSC IPC and testing scope of delivery
- 20 Unpacking
- 20 Scope of delivery
- 21 Mounting Conditions
- 21 Environmental conditions
- 21 Ventilation
- 22 Mounting situation
- 24 Fixing
- 24 Accessories
- 24 Mounting
- 24 Connection of the peripherals
- 24 Safety
- 25 External connections and interfaces
- 28 Connecting supply distribution
- 29 Putting into Operation
- 29 Functional elements
- 30 Switch-on of the current supply
- 30 Conditions
- 30 To boot the computer
- 30 Software installation
- 30 Installation of the operating system
- 30 Installation of the periphery drivers
- 35 Data back-up
- 36 BIOS Setup
- 36 Hints for BIOS-Setup
- 36 Calling BIOS-Setup
- 37 Setup Main Menue
- 39 Standard CMOS Setup
- 41 BIOS Features Setup
- 45 Chipset Features Setup
- 48 Power Management Setup
- 51 PNP/PCI Configuration
- 54 Integrated Peripherals
- 60 MicroDesign Features Setup
- 62 Software Interfaces
- 62 Address Overview System Memory
- 63 Interrupts (IRQ)
- 64 System expansions/Alterations
- 64 Safety
- 64 Open housing
- 65 Installation of a slot card
- 66 Install Memory Module
- 67 Install field bus module (Hilscher)
- 69 Fault diagnosis
- 69 General references
- 69 General errors, cause, remedy
- 71 Maintenance/Repair of the MSC IPC
- 71 Safety
- 71 Cleaning
- 71 General Hints
- 71 Cleaning of fan filter mat
- 72 Replace device fan
- 73 Replace CPU fan
- 74 Replace system battery
- 76 Spare parts
- 76 Questions to the manufacturer, user questions
- 76 Contact
- 76 Data for calling
- 76 Current Drivers and Tools