Calling. Alpine CDA-9813, CDA-9815, CDA-9811

Calling

Calling by the address book

You can call up the address book registered in the portable telephone to call from.

1

Press and hold BAND/TEL. for at least 2 seconds.

2

Press SEARCH to select Phone Book mode.

A list in alphabetic order is displayed.

Retrieving an addressee by Alphabetic Sort List

3

When displaying the Alphabetic Sort List, turn the

Rotary encoder or press g or f to select

the addressee.

4

Press :/J or Rotary encoder to place a call.

5

Press BAND/TEL. to end the call.

Telephone mode will end and return to the original source mode.

Retrieving an addressee by Selecting Search (A-Z search)

3

Press 8 or 9 to select an initial letter (A to Z) of the

addressee.

4

Turn the Rotary encoder to select the addressee.

5

Press the Rotary encoder to place a call.

6

Press BAND/TEL. to end the call.

Telephone mode will end and return to the original source mode.

• If all telephone numbers and registered names cannot be displayed at once, press TITLE / to show undisplayed numbers and names.

• “NO MEMORY” (“NO MEM” for CDA-9811) is displayed if nothing is registered in the Phone Book.

Calling by using the Speed Dial

You can place a call by retrieving one of the telephone numbers registered in No. 1 to 9 of the address book.

1

Press and hold BAND/TEL. for at least 2 seconds.

2

Within 5 seconds, press and hold (for at least 2 seconds) a preset button (1 through 6) to place a call.

By pressing F/SETUP, and then pressing a preset button (1 through 3) for at least 2 seconds, you can place a call to the number registered in 7 to 9.

• You can place a call by pressing :/J after momentarily pressing

the preset button (1 through 6) of the number you wish to call.

• You can place a call by pressing the Rotary encoder, after selecting

a number which you wish to call, by pressing g or f , or by

turning the Rotary encoder.

3

Press BAND/TEL. to end the call.

Telephone mode will end and return to the original source mode.

• If there is no telephone number registered to a preset button, “NO

PRESET” (“NO P-SET” for the CDA-9811) is displayed when you try to place a call.

28

-EN

Calling by the outgoing/incoming/absent incoming history

You can place a call to any of the last 999 calls by the outgoing/ incoming/absent incoming history.

1

Press SEARCH in Phone Book mode to select the History mode.

2

Press 8 or 9 to select outgoing history (display

example: “DIALED”), incoming history (display example: “RECEIVED” ), absent incoming history

(display example: “MISSED”).

3

Turn the Rotary encoder, or press g or f to

select the addressee from the outgoing or incoming history.

4

Press :/J or the Rotary encoder to place a call.

5

Press BAND/TEL. to end the call.

Telephone mode will end and return to the original source mode.

• If all telephone numbers and registered names cannot be displayed at once, press TITLE / to show undisplayed numbers and names.

• “NO MEMORY” (“NO MEM” for CDA-9811) is displayed if there is no incoming history.

SMS (Short Message Service) Operation

You can be informed when you receive a short message.

Receiving a short message

1

When a text message is received, “NEW

MESSAGE” for CDA-9815, “NEW MESSAG” for

CDA-9813 or “NEW MSG” for CDA-9811 is indicated on the display.

The contents of the received message can only be read from the portable phone's display.

2

Press any one of the buttons on the unit to cancel the display. The buttons that are pressed will enter the mode or will be activated.