Connections for CDA-9815/CDA-9813

9

1

Blue

Blue/White

POWER ANT

REMOTE

TURN-ON

2

3

Pink/Black

AUDIO

INTERRUPT IN

4

Orange

ILLUMINATION

5

Red

Yellow

IGNITION

BATTERY

6

7

Black

GND

8

+

;

F/R Sub. W

X-OVER

∗1

<

3WAY

EQ/DIV

Ai-NET

∗1

NORM

!

Gray

"

SPEAKER

RIGHT FRONT

Gray/

Black

#

SPEAKER

RIGHT REAR

Violet/

Black

$

Violet

%

SPEAKER

LEFT REAR

Green

&

Green/

Black

(

White/

Black

)

SPEAKER

LEFT FRONT

White

~

,

-

.

/

Antenna

To power antenna

To amplifier or equalizer

To vehicle phone

To instrument cluster illumination lead

Ignition Key

Speakers

Front right

Battery

Rear right

Rear left

Front left

:

CD Changer

(Sold Separately)

Amplifier

:

Amplifier

:

Amplifier

Speakers

Front Left

Front Right

Rear Left

Rear Right

Subwoofers

*

1 The label is attached on the bottom of the unit.

38

-EN

1 Antenna Receptacle

2 Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier, or a signal processor, etc.

3 Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

4 Audio Interrupt In Lead (Pink/Black)

5 Illumination Lead (Orange)

This lead may be connected to the vehicle's instrument cluster illumination lead. This will allow the backlighting of the unit to dim whenever the vehicle's lights are turned on.

6 Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position.

7 Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle's battery.

8 Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle.

Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

9 Choke Coil with Fuse Holder

(20A)

! Power Supply Connector

" Right Front (+) Speaker Output Lead (Gray)

# Right Front (–) Speaker Output Lead (Gray/Black)

$ Right Rear (–) Speaker Output Lead (Violet/Black)

% Right Rear (+) Speaker Output Lead (Violet)

& Left Rear (+) Speaker Output Lead (Green)

( Left Rear (–) Speaker Output Lead (Green/Black)

) Left Front (–) Speaker Output Lead (White/Black)

~ Left Front (+) Speaker Output Lead (White)

+ Ai-NET Connector

Connect this to the output or input connector of other product (CD Changer, Equalizer, etc.) equipped with Ai-

NET.

You can input TV/video sound by connecting an optional Ai-

NET/RCA Interface cable (KCA-121B) to this component.

, Ai-NET Cable (Included with CD Changer)

- Front Output RCA Connectors

RED is right and WHITE is left.

. Rear Output RCA Connectors

RED is right and WHITE is left.

/ Subwoofer RCA Connectors

RED is right and WHITE is left.

: RCA Extension Cable (Sold Separately)

; Setting the 3WAY/2 WAY switch

Set the 3way/2way switch according to your audio system.

< System Switch

When connecting a processor or divider using Ai-NET, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.

Be sure to turn the power off to the unit before changing the switch position.

The X-Over Switch position for a two-way system

(frequency range is divided between highs for front/rear and lows for the Subwoofer).

The position of the X-Over switch : F/R/Sub-W

The X-Over Switch position for a three-way system whose frequency range is divided among the highs (Front), mids

(Rear), and lows (Subwoofer).

The position of the X-Over switch: 3WAY

Front high range speaker (L)

Rear high range speaker (L)

Low range speaker (L)

Front high range speaker (R)

Rear high range speaker (R)

Low range speaker (R)

Output of this unit :

Front output

• Use the SUB-W output cord to connect the unit to the low range speaker.

• You can use the built-in amplifier to output the front output/rear output.

• You cannot adjust the fader when set to 3WAY.

High range speaker (L)

Mid range speaker (L)

Low range speaker (L)

Rear output

High range speaker (R)

Mid range speaker (R)

Low range speaker (R)

SUB-W output

To prevent noise/interference in the audio system.

• Locate the unit and route the leads at least 10 cm away from the car harness.

• Keep the battery power leads as far away from other leads as possible.

• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

39

-EN

LIMITED WARRANTY

ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.

[

PRODUCTS COVERED:

This Warranty covers Car Audio/Visual Products and

Related Accessories ("the product"). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A. are covered only in the U.S.A.

[

LENGTH OF WARRANTY:

This Warranty is in effect for one year from the date of the first consumer purchase.

[

LIFETIME TAPE HEAD WARRANTY:

All Alpine Car Audio analog tape heads excluding Video tape heads are warranted for life against manufacturing defects causing failure.

[

WHO IS COVERED:

This Warranty only covers the original purchaser of the product, who must reside in the United States, Puerto Rico or Canada.

[

WHAT IS COVERED:

This Warranty covers defects in materials or workmanship

(parts and labor) in the product.

[

WHAT IS NOT COVERED:

This Warranty does not cover the following:

1 Damage occurring during shipment of the product to

Alpine for repair (claims must be presented to the carrier).

2 Damage caused by accident, abuse, negligence, misuse, improper connections, improper operation or failure to follow instructions contained in the Owner's manual.

3 Damage caused by act of God, including without limitation, earthquake, fire, flood, storms or other acts of nature.

4 Any cost or expense related to the removal or reinstallation of the product.

5 Service performed by an unauthorized person, company or association.

6 Any product which has the serial number defaced, altered or removed.

7 Any product which has been adjusted, altered or modified without Alpine's consent.

8 Any product not distributed by Alpine within the United

States, Puerto Rico or Canada.

9 Any product not purchased from an Authorized Alpine

Dealer.

! Any product that has been determined to contain an excessive amount of dust or dirt and any product that contains other contaminants including liquid or foreign objects.

[

HOW TO OBTAIN WARRANTY SERVICE:

1 You are responsible for delivery of the product to an

Authorized Alpine Service Center or Alpine for repair and for payment of any initial shipping charges. Alpine will, at its option, repair or replace the product with a new or reconditioned product without charge. If the repairs are covered by the warranty, and if the product was shipped to an Authorized Alpine Service Center or

Alpine, Alpine will pay the return shipping charges.

2 You should provide a detailed description of the problem(s) for which service is required.

3 You must supply proof of your purchase of the product.

4 You must package the product securely to avoid damage during shipment.

[

HOW WE LIMIT IMPLIED WARRANTIES:

ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR

USE AND MERCHANTABILITY ARE LIMITED IN

DURATION TO THE PERIOD OF THE EXPRESS

WARRANTY SET FORTH ABOVE AND NO PERSON IS

AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER

LIABILITY IN CONNECTION WITH THE SALE OF THE

PRODUCT.

[

HOW WE EXCLUDE CERTAIN DAMAGES:

ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR

INCIDENTAL AND CONSEQUENTIAL DAMAGES

CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL

DAMAGES" REFERS TO EXPENSES OF

TRANSPORTING THE PRODUCT TO THE ALPINE

SERVICE CENTER, LOSS OF THE ORIGINAL

PURCHASER'S TIME, LOSS OF THE USE OF THE

PRODUCT, BUS FARES, CAR RENTALS OR OTHERS

COSTS RELATING TO THE CARE AND CUSTODY OF

THE PRODUCT. THE TERM "CONSEQUENTIAL

DAMAGES" REFERS TO THE COST OF REPAIRING OR

REPLACING OTHER PROPERTY WHICH IS DAMAGED

WHEN THIS PRODUCT DOES NOT WORK PROPERLY.

THE REMEDIES PROVIDED UNDER THIS WARRANTY

ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.

[

HOW STATE/PROVINCIAL LAW RELATES TO THE

WARRANTY:

This Warranty gives you specific legal rights, and you may also have other rights which vary form state to state and province to province. In addition, some states/provinces do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you.

[

IN CANADA ONLY:

This Warranty is not valid unless your Alpine car audio product has been installed in your vehicle by an Authorized

Installation Center, and this warranty stamped upon installation by the installation center.

[

HOW TO CONTACT CUSTOMER SERVICE:

Should the product require service, please call the following number for your nearest Authorized Alpine Service Center.

U.S.A.

1-800-ALPINE-1 (1-800-257-4631)

CANADA 1-800-ALPINE-1 (1-800-257-4631)

Alpine Electronics of America, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A.

Alpine Electronics of Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario, L3R 9Z6, Canada