UM1250 Preface
ST40 Micro Toolset GDB command scripts (8045872)
This document describes using GDB command scripts to configure an ST Micro Connect 1
(STMC1) or a ST Micro Connect Lite (STMCLite) to connect to a target board for loading and debugging programs through sh4gdb or sh4xrun.
32-Bit RISC series, ST40 Core architecture manual (7182230)
This manual describes the architecture and instruction set of the ST40 core as used by
STMicroelectronics.
ST40 core support peripherals manual (7988763)
This manual describes the ST40 core support peripheral (CSP) package that give the optional peripherals for use in ST40-based System On Chips (SoCs).
ST Micro Connection Package documentation suite
The following documents are not distributed with the ST40 Micro Toolset, but can be obtained from your ST FAE or ST support center.
ST TargetPack user manual (8020851)
This manual describes the ST TargetPack, which is a method of describing target systems based upon ST system-on-chip devices.
Developing with an ST Micro Connect and ST TargetPacks application note
(8174498)
This application note describes various aspects of using an ST Micro Connect host-target interface for system development.
Conventions used in this guide
General notation
●
●
●
●
●
The notation in this document uses the following conventions: sample code
, keyboard input and file names
variables, code variables and code comments equations
and math
screens, windows, dialog boxes and tool names
instructions
Hardware notation
The following conventions are used for hardware notation:
●
●
REGISTER NAMES and FIELD NAMES
PIN NAMES and SIGNAL NAMES
8045872 Rev 9 7/87
