UM1250 GDB command files
2.35 fudb_gpd201.cmd
Defines the commands that set the configuration registers for the FLi7540 on an
STMicroelectronics FLi7540 development board. See
Table 51
.
Table 53.
fudb_gpd201.cmd
Command
fudb_gpd201simse_setup fudb_gpd201simseuc_setup fudb_gpd201simse29_setup fudb_gpd201_sim_memory_define
Description
Set simulated FLi7540 development board configuration registers with the ST40 in SE mode with cached RAM mappings.
Set simulated FLi7540 development board configuration registers with the ST40 in SE mode with uncached RAM mappings.
Set simulated FLi7540 development board configuration registers with the ST40 in SE mode with 29-bit compatibility RAM mappings in P1 and P2.
Define memory regions for the FLi7540 development board to the ST40 simulator.
2.36 hdk5189.cmd
Defines the commands that set the configuration registers for the STi5189 on an
STMicroelectronics STi5189-HDK board. See
Table 54
.
Table 54.
hdk5189.cmd
Command
hdk5189sim_setup hdk5189simse_setup hdk5189simseuc_setup hdk5189simse29_setup hdk5189_display_registers hdk5189_sim_memory_define
Description
Set simulated STi5189-HDK board configuration registers.
Set simulated STi5189-HDK board configuration registers with the ST40 in SE mode with cached RAM mappings.
Set simulated STi5189-HDK board configuration registers with the ST40 in SE mode with uncached RAM mappings.
Set simulated STi5189-HDK board configuration registers with the ST40 in SE mode with 29-bit compatibility RAM mappings in P1 and P2.
Display the STi5189 configuration registers.
Define memory regions for the STi5189-HDK board to the ST40 simulator.
8045872 Rev 9 43/87
