advertisement
INSTALLATIONS
CN3: PS/2 Keyboard and Mouse Connector
CN3 is the PS/2 keyboard/mouse connector that is on the bracket of the
CPU card. It uses a Y-cable for a PS/2 keyboard and a PS/2 mouse.
Pin #
1
Signal Name
Keyboard data
CN3
3 Ground
4 Vcc
5 Keyboard Clock
UJ1: USB Connector
UJ1 is the single-port USB connector that is on the bracket of the CPU card.
CN4: VGA Connector
[[[[
CN4 is the VGA connector that is on the bracket of the CPU card.
Signal Name Pin # Pin # Signal Name
HSYNC 13 14 VSYNC
NC 15
J16: RJ45 Connector
J16 is the RJ-45 connector that is on the bracket of the CPU card. The figure below shows the pin out assignments of the connector and its corresponding input jack.
Active LED
Link LED
RJ-45
14 IB930 User’s Manual
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project