PC Cards CIFX 104

Device Drawings

System LED

(gelb/grün) /

(yellow/green)

Modulnetzwerkstatus-LED

(rot/grün) /

Module Network Status LED

(red/green)

DeviceNet-Schnittstelle

COMBICON-Stecker (X360, 5-polig)

DeviceNet Interface

COMBICON male Connector

(X360, 5 pin)

47/171

Steckbrücke Datenbusbreite

(J9, im Bild Brückung für 16 Bit)

Data Bus Width Jumpers

(J9, Jumper Settings for 16 Bit shown)

Mini-B-USB-Buchse /

Mini-B USB Plug

(X5, 5-polig /

5 pin

)

Drehschalter Geräteadresse /

Rotary Switch Device Address

(ohne Funktion /

without function

)

PC/104 Bus

(X1, 64-polig /

64 pin

)

(X2, 40-polig /

40 pin

)

(x16)

(x1)

Interrupt-Steckbrücke /

Interrupt Jumper

(J8, 11-polig /

11 pin

)

Adresssteckbrücke /

Address Jumpers

(J7, 7-polig /

7 pin

) je mit Standardbrückungen /

Default Jumper Settings each

Figure 10: CIFX 104-DN

Note:

ƒ

In

Interrupt Mode

(IRQ = Interrupt Request) exactly one jumper must be set. If no jumper is set, the PC card cifX works in

Polling Mode

.

For further details refer to

Table 23: Starting Address and Interrupt for

16 KByte Dual-Port Memory

on page 59.

ƒ For the pin assignment of the

PCI/104

bus X1/X2 refer to section

Pin

Assignment for PC/104 Bus

on page 104.

ƒ For further information on the

Mini-B USB

Connector refer to section

Mini-B USB Connector (5 Pin)

on page 99.

PC Cards cifX PC/104 | Installation, Operation and Hardware Description

DOC120206UM44EN | Revision 44 | English | 2015-07 | Released | Public © Hilscher, 2008-2015