advertisement
The Brake System
5.3. Checking and Readjusting Hydraulic Rim
Brakes
Hydraulic brakes are extremely powerful and require very little maintenance.
Danger:
Manufacturers of hydraulic brakes deliver their products with detailed operating instructions. You find these instructions on the STEVENS
CD-ROM. Read them carefully before removing the wheel or doing any maintenance work. Misuse can lead to brake failure or accidents!
Danger:
Loose connections and leaky brake lines drastically impair braking effect. If you find leaks in the brake system or buckled lines, contact your STEVENS dealer. Risk of accident!
24
With hydraulic rim brakes, as well, the brake pads wear down and the lever travel increases. Most brake models are, however, fitted with a bolt or a small knob (TPA, Turbo Pad Adjuster, for tool less brake pad wear for
Magura HS33) at the control unit, brake lever to compensate the wear.
Check the pads regularly for wear and alignment. Indicators, i.e. usually grooves in the pads, tell you whether the brake pads are worn down or not. If the pads are worn down to the bottom of the grooves, it is time to replace them.
Keep the brake callipers, especially the brake pad area, clean, as dirt can prevent the pads from travelling back in their rest position. Regularly check the lines and connections for leaks.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Component Description
- 6 General Safety Instructions
- 8 1.1. Before Your First Ride
- 9 1.2. Before Every Ride
- 10 Legal Requirements for Riding on Public Roads
- 12 Adjusting the Bicycle to the Rider
- 12 3.1. Adjusting the Saddle Height
- 14 3.2. Adjusting the Height of the Handlebars
- 14 3.2.1. Conventional Stems
- 15 3.2.2. Stems for Threadless Systems, the Aheadset®-System
- 17 3.3. Correcting the Fore-to-Aft Position and Tilt of the Saddle
- 17 3.3.1. Adjusting Saddle Position and Tilt
- 18 3.4. Adjusting the Brake Lever Reach
- 18 3.5. Adjusting the Tilt of the Handlebars, Bar Ends and Brake Levers
- 20 The Pedal Systems
- 20 4.1. Different Systems at a Glance – How They Work
- 21 4.2. Adjustment and Maintenance
- 22 The Brake System
- 22 5.1. Functioning and Wear
- 23 5.2. Rim Brakes (General)
- 23 5.2.1. Checking, Readjusting and Synchronizing V-Brakes
- 23 5.2.2. Functional Check
- 24 5.2.3. Vertical Adjustment of the Brake Pads
- 24 5.2.4. Synchronizing and Readjusting the Brakes
- 25 5.3. Checking and Readjusting Hydraulic Rim Brakes
- 26 5.4. Hydraulic Disc Brakes (General)
- 27 5.4.1. Checking and Readjusting Hydraulic Disc Brakes
- 27 5.5. Back-Pedal Brakes
- 28 The Gears
- 28 6.1. Derailleur Gears
- 28 6.1.1. Functioning and Operation
- 29 Push-Button Shifters
- 30 6.1.1.2. Twist Grip Shifters
- 31 6.1.2. Checking and Readjusting the Gears
- 32 Rear Derailleur
- 32 6.1.2.2. Adjusting the Limit Stops
- 33 6.1.2.3. Front Derailleur
- 34 6.2. Multi-Speed Hubs
- 34 6.2.1. Functioning and Operation
- 34 6.2.2. Readjusting
- 35 6.2.3. Checking the Chain Tension
- 35 6.2.3.1. Readjusting the Chain Tension on Bicycles with Adjustable Drop-Outs
- 36 6.3. Chain Maintenance
- 36 6.3.1. Chain Wear
- 37 The Wheels
- 37 7.1. Tyres, Tubes, Rim Tapes, Valves, Inflation Pressure
- 39 7.2. Rim Trueness, Spoke Tension
- 39 7.3. Wheel Fastening with Axle-Nuts, Quick-Releases or Thru Axles
- 39 7.3.1. Wheel Fastening with Axle-Nuts
- 39 7.3.2. Wheel Fastening with Quick-Releases
- 40 7.3.2.1. How to Securely Fasten the Wheel with Quick-Releases
- 41 7.3.3. Wheel Fastening with Thru Axles
- 43 7.4. Repairing Punctures
- 43 7.4.1. Wheel Removal
- 45 7.4.2. Removing Clincher and Folding Tyres
- 46 7.4.3. Mounting Clincher and Folding Tyres
- 48 7.4.4. Removing Tubeless Tyres
- 48 7.4.5. Mounting Tubeless Tyres
- 49 7.4.6. Mounting Wheels