CAMERA. Grandstream Networks GXV3275

CAMERA

The GXV3275 has built-in Camera to support taking pictures and recording videos. Users can also use the camera during SIP video calls as well as video calls via 3rd party applications such as Microsoft Lync. To

on the desktop or phone's menu. access Camera to take pictures and videos, tap on Camera icon

Camera Settings:

- Brightness settings

- White balance

- Store location on/off

Take Picture/Video:

If camera mode is "Taking Picture", tap on the Blue button to take a picture.

If camera mode is "Taking Video", it will show Red button. Tap on it to start/stop taking video.

Camera Mode:

Tap on the camera icon here to switch mode between taking video or picture.

Figure 132: GXV3275 Camera

TAKE PICTURE

1.

Select the camera mode as to take picture.

2.

Tap on the Blue button to take a picture.

3.

The captured picture can be accessed under FileManager->Internal Storage->DCIM->Camera.

RECORD VIDEO

1.

Select the camera mode as to record video.

2.

Tap on the Red button to start/stop recording.

3.

The recorded video can be accessed under FileManager->Internal Storage->DCIM->Camera.

Firmware Version 1.0.3.46 GXV3275 User Guide Page 153 of 187

CAMERA SETTINGS

Tap on icon to bring up camera settings.

Brightness Settings:

Tap on it to adjust brightness. There are 7 levels from -3 to +3.

White Balance:

Tap on it to select lighting type for the picture.

There are 5 different options. Usually

"Automatic" (the one with A/W icon) should work for most of the scenarios.

Store Location:

Enable/Disable location information stored for the picture.

Figure 133: GXV3275 Camera Settings

ANGLE ADJUSTMENT

On the back of the GXV3275 camera, users could scroll the wheel up/down to adjust the camera angle. If users scroll the camera all the way up until the icon camera is turned off. shows up on the status bar of the screen, the

Firmware Version 1.0.3.46 GXV3275 User Guide Page 154 of 187