advertisement
Home Machine
Quilting Frame
Recommendation
•
Baby Lock Pearl Frame
•
Baby Lock Momentum Frame
Baby Lock Crown Jewel III
Safety Section
NOTE: Do not operate your Baby Lock Crown Jewel III quilting machine until you have completely read the information contained in this manual. Please keep all packaging and sales order information for warranty purposes.
1.
electric outlet when performing any maintenance, changing the needle, removing thread locks, or when left unattended.
2.
Keep fingers away from all moving parts. Use caution around the needle or sharp external components.
3.
Change the needle often. Do not use bent or dull needles.
4.
Switch the power off when making any adjustments in the needle or bobbin area, such as threading the needle, installing the bobbin case, oiling or when cleaning.
5.
Never drop or insert foreign objects into any opening.
6.
The Baby Lock Crown Jewel III should only be used
indoors away from moisture.
7.
The Baby Lock Crown Jewel III should not be stored or used in extreme temperatures.
8.
Use the Baby Lock Crown Jewel III only for its intended use as described in this manual.
9.
Use only attachments recommended by the manufacturer in this manual.
10.
To disconnect from the wall outlet, push the switch to the off position, then remove the plug from outlet pulling from the plug, not the cord. Never operate the Baby
Lock Crown Jewel III if the cord is damaged in any way. If a mechanical or electrical problem is encountered, please consult local authorized Baby Lock retailer.
10
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Important Information
- 10 Baby Lock Crown Jewel III Quick Facts
- 10 Baby Lock Crown Jewel III Disclaimer
- 11 Home Machine Quilting Frame Recommendation
- 11 Baby Lock Crown Jewel III Safety Section
- 12 Package Contents/Included Accessories
- 13 Optional Accessory Listings
- 15 Rear and Front Diagram C
- 16 Installing Machine on Carriage
- 17 Installing Front Handles
- 18 Installing Rear Handles
- 18 Cluster LED Light Installation and/or Replacement
- 19 Inserting (or Changing) the Needle/Needle Guide
- 20 Installing the Power Cord
- 20 Installing the Thread Mast
- 21 Laser Stylus Safety and Use Guidelines
- 22 Installing the Laser Stylus
- 23 Threading the Machine
- 24 Changing the Hopping Feet
- 25 Bobbin and Thread Tension Adjustments
- 27 Maintenance
- 28 Using the Touch Screen Displays on the Handlebars
- 39 Baby Lock Crown Jewel III Stitch Regulator Setup
- 40 To Begin Quilting
- 41 Troubleshooting
- 49 Crown Jewel III Micro Handles
- 50 Pro-Stitcher