relocation of the refrigerator. Beko TS190320
Add to My manuals26 Pages
Beko TS190320 is a modern refrigerator designed to efficiently preserve and cool your food and beverages. Equipped with adjustable shelves, a crisper drawer, and door shelves, it provides ample storage space for a variety of items. The refrigerator also features an ice-making compartment, allowing you to easily make and store ice cubes. With its sleek design and user-friendly features, the Beko TS190320 is a great choice for those seeking a reliable and efficient refrigeration solution.
advertisement
3 Installation
B
In case the information which are given in the user manual are not taken into account, manufacturer will not assume any liability for this.
Points to be paid attention to when the relocation of the refrigerator
1. Your refrigerator should be unplugged.
Before transportation of your refrigerator, it should be emptied and cleaned.
2. Before it is re-packaged, shelves, accessories, crisper, etc. inside your refrigerator should be fixed with adhesive tape and secured against impacts. Package should be bound with a thick tape or sound ropes and the transportation rules on the package should be strictly observed.
3. Original packaging and foam materials should be kept for future transportations or moving.
Before you start the refrigerator,
Check the following before you start to use your refrigerator:
1. Attach 2 plastic wedges as illustrated below. Plastic wedges are intended to keep the distance which will ensure the air circulation between your refrigerator and the wall. (The picture is drawn up as a representation and it is not identical with your product.)
2. Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.
3. Connect the plug of the refrigerator to the wall socket. When the fridge door is opened, fridge internal lamp will turn on.
4. When the compressor starts to operate, a sound will be heard. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.
5. Front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.
Electrical connection
Connect your product to a grounded socket which is being protected by a fuse with the appropriate capacity.
Important:
The connection must be in compliance with national regulations.
• The power plug must be easily accessible after installation.
• Electrical safety of your refrigerator shall be guaranteed only if the earth system in your house complies with standards.
• The voltage stated on the label located at left inner side of your product should be equal to your network voltage.
•
Extension cables and multi plugs must not be used for connection.
11
EN
advertisement
Key Features
- White Freestanding 86 L
- SN-T
- Reversible doors
- 43 dB
- 118 kWh
Related manuals
advertisement
Table of contents
- 5 Intended use
- 5 General safety
- 9 Child safety
- 9 Disposing of the Waste Product
- 10 Package information
- 10 HC warning
- 12 relocation of the refrigerator
- 12 Before you start the refrigerator
- 12 Electrical connection
- 13 Disposing of the packaging
- 13 Disposing of your old refrigerator
- 13 Placing and Installation
- 14 Replacing the interior light bulb
- 15 Adjusting the legs
- 16 Reversing the doors
- 18 Making ice cubes
- 18 Defrosting of the appliance
- 19 Cooling
- 19 Food storage
- 21 Protection of plastic surfaces