Configuring time and date . UTC TVR-6016-500, TVR-6016-4T, TruVision DVR 60, TVR 60 series, TruVision IP Dome, TVR-6016-12T, TVR-6016-1T

5BChapter 6: Configuring the live mode display

Monitor setup

To configure monitors

:

1. Enter the Display Settings screen by selecting

Display

in the main menu.

2. Click the tab. The Monitor screen appears. Modify the required

settings. See Table 12 on page 40.

3. Click the button to save the settings.

4. Click

OK

to return to the main menu.

Enabling a password

The Password Required option determines whether or not users must enter their passwords to gain access to the different functions of the DVR.

To enable password access:

1. Enter the Display Settings screen by selecting

Display

in the main menu.

2. Click the tab. The Monitor screen appears.

3. Check the Password Required box to enable or disable the option.

4. Click the button to save the settings.

5. Click

OK

to return to the main menu.

Configuring time and date

You can set up the date and time that will appear on-screen and time stamped recordings. The start and end time of daylight savings time (DST) in the year can

also be set. DST is deactivated by default. See Figure 18 below for the Time

settings screen.

Figure 18: Time screen

TruVision DVR 60 User Manual 41