Assembling

Unpack

Check your product box for the following items:

●

●

Mobile device

Quick start guide

Use only Samsung-approved software. Pirated or illegal software may cause damage or malfunctions that are not covered by your manufacturer's warranty.

●

●

●

●

The items supplied with your device and available accessories may vary depending on your region or service provider.

You can buy additional accessories from your local

Samsung retailer.

The supplied items are designed only for your device and may not be compatible with other devices.

Other accessories may not be compatible with your device.

Assembling

10

Device layout

›

Front view

1

2

3

4

Number Function

5

6

7

1

2

3

4

Power/Reset/Lock key

Volume key

Light sensor

Speaker

SIM card slot

Front camera lens

Multifunction jack

Assembling

11

5

6

4

7

›

Rear view

8

9

10

11

12

13

Number Function

8

9

10

11

12

13

Microphone

Rear camera lens

Main antenna

Flash

Headset jack

1

Wi-Fi/Bluetooth/GPS internal antenna

2

1. Connecting a headset to your device improperly can damage the headset jack or the headset.

2. Do not touch or cover the area around the antenna with your hands or other objects while using the GPS functions.

Assembling

12

Keys

Key

Power/

Reset

Lock

1

/

Volume

Function

Turn on the device (press and hold);

Access the device options (press and hold); Reset the device (press and hold for 10-15 seconds); Turn off and lock the touch screen or turn it on.

Adjust the device’s volume.

Insert the SIM or USIM card

1

2

When you subscribe to a cellular service, you will receive a Subscriber Identity Module (SIM) card, with subscription details, such as your personal identification number (PIN) and optional services. To use UMTS or HSDPA services, you can purchase a Universal Subscriber Identity Module (USIM) card.

Open the cover of the SIM card slot.

Insert the SIM or USIM card with the gold-coloured contacts facing downwards.

1. If your device experiences fatal errors, hanging, or freezing, you may need to reset the device to regain functionality.

Assembling

13

The SIM card slot of your device is only suited for standard SIM cards. Inserting a microSIM card or a microSIM card with an unauthorised holder may cause damage to the SIM card slot of your device.

3

Close the cover of the SIM card slot.

Charge the battery

Before using the device for the first time or when the battery has been unused for an extended period, you must charge the battery. Charge the battery only with a charger. You cannot charge the battery with a USB cable.

You cannot replace the battery in the device. If you have problems with the battery or need it replaced, take the device to a Samsung Service Centre.

Use only Samsung-approved chargers and cables.

Unapproved chargers or cables may cause batteries to explode or damage your device.

●

●

●

When your battery is low, the device will emit a warning tone and show a low battery message.

Recharge your battery to continue using your device.

If the battery is completely discharged, you cannot turn on the device, even while it is charging. Allow a depleted battery to charge for a few minutes before you try to turn on the device.

The shape of the USB power adapter may differ depending on your region.

Assembling

14

1

Connect the AC plug to the charging head, and then plug the USB cable into the USB power adapter and the multifunction jack.

Connecting the USB cable improperly may cause serious damage to the device or USB power adapter.

Any damage caused by misuse is not covered by the warranty.

2

Plug the USB power adapter into an electrical socket.

●

If the device receives an unstable power supply while charging, the touch screen may not function. If this happens, unplug the USB cable from the device.

●

●

The device may heat up while charging. This is normal and should not affect your device’s lifespan or performance.

If your device is not charging properly, take your device and the charger to a Samsung Service Centre.

Assembling

15

3

When the battery is fully charged, first unplug the USB cable from the device, and then unplug the USB power adapter from the electrical socket.

To save energy, unplug the USB power adapter when not in use. The USB power adapter does not have a power switch, so you must unplug the USB power adapter from the electrical socket when not in use to avoid wasting power. The device should remain close to the electrical socket while charging.

●

●

●

●

●

●

●

●

›

Reduce the battery consumption

Your device provides options that help you save battery power. By customising these options and deactivating features in the background, you can use the device longer between charges:

Activate Power saving mode.

When you are not using your device, switch to Sleep mode by pressing the Power key.

Close unnecessary applications with the task manager.

Deactivate the Bluetooth feature.

Deactivate the Wi-Fi feature.

Deactivate auto-syncing of applications.

Decrease the backlight time.

Decrease the brightness of the display.

Assembling

16