advertisement
▼
Scroll to page 2
of 92
1.3.1 camin 8M+TC
The camin 8M+TC is the camin 8M's bigger brother. In addition to all features of the 8M it introduces recording of lens and rig meta data, all in sync with time code put in via a 5pin SMPTE TC in. This meta data can be output either serially via CBUS or written to a USB memory stick for later use.
Please Note: When mounting a camin, make sure that all cables can be connected without strain.
All content © 2011-2012, cmotion GmbH. All specifications subject to change without notice. http://www.cmotion.eu
12/92
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download PDF
advertisement
Table of contents
- 7 Before Use
- 8 Using this Guide
- 9 1. Component Overview
- 9 1.1 camin 2M/4M/8M/8M+TC
- 10 1.1.1 camin 2M
- 10 1.1.2 camin 4M
- 11 1.1.3 camin 8M
- 12 1.3.1 camin 8M+TC
- 13 1.1.4 cvolution camin wireless systems
- 14 1.1.5 Connectors and Controls on the camin
- 15 1.1.6 LED Status camin 2M/4M/8M
- 16 camin 2M/4M/8M/8M+TC
- 17 1.2 cvolution hand unit
- 18 cvolution hand unit
- 19 1.2.2 LED Status cvolution hand unit
- 20 1.2.3 Technical Specifications cvolution hand unit
- 21 1.3 cvolution basic knob
- 21 1.4 cvolution advanced knob
- 22 1.5 cvolution slider
- 23 1.6 cvolution zoom
- 24 1.6.1 Connectors, Buttons and Display of the cvolution zoom
- 24 1.6.2 Technical Specifications cvolution zoom
- 25 1.7 cvolution knob solo
- 26 1.7.1 Connectors, Buttons and LEDs of the cvolution knob solo
- 26 1.7.2 Technical Specifications cvolution knob solo
- 27 1.8 cforce
- 28 2. cvolution system Accessories
- 28 2.1.1 Battery
- 28 2.1.2 Battery Charger
- 28 2.1.3 cvolution CBUS splitter
- 29 2.1.4 cvolution handle
- 29 2.1.5 cstrap
- 29 2.1.6 clamp
- 30 2.1.7 cfastener
- 30 2.1.8 cfast-czoom
- 30 2.1.9 cfast-vlock
- 31 2.1.10 cfast-artemis
- 31 2.1.11 Antenna
- 31 2.1.12 Marker Ring
- 32 2.1.13 Pre-marked Marker Rings
- 34 2.1.14 Marker Strip
- 35 3. System Setup
- 35 3.1 camin 2M/4M/8M
- 35 3.1.1 Attaching camin to the Camera
- 36 3.1.2 Attaching cfast-vlock
- 36 3.1.3 Releasing cfast-vlock
- 36 3.1.4 Mounting the Antenna