6.3. IR Cable Pin Assignment. CYP CH-1507TX, CH-1507RX

Add to My manuals
13 Pages

advertisement

6.3. IR Cable Pin Assignment. CYP CH-1507TX, CH-1507RX | Manualzz

6.3. IR Cable Pin Assignment

IR Blaster

1

Power 3.3V

2

IR Blaster Signal

3

NC

IR Extender

1

IR Signal

Power 3.3 V

2

3

Grounding

6.4. D-Sub 9 Pin Definitions

Pin Define TX / RX

7

8

5

6

9

3

4

1

2

N/C

TxD / RxD

RxD / TxD

N/C

GND

N/C

N/C

N/C

N/C

5

advertisement

Related manuals

Frequently Answers and Questions

What are the main features of the CYP CH-1507RX HDMI to CAT5e/6 with LAN/IR/RS-232 Receiver?
It supports HDMI with 3D, 4K×2K support, HDCP & DVI Compliant, simultaneous transmission of uncompressed data over a single 100m/328ft CAT5e/6/7 cable, uncompressed video 1080p, 60Hz, 36-bit, audio support up to 7.1CH & Dolby TrueHD, DTS-HD, and 5Play™ convergence: HDMI, LAN, PoE & Control (IR & RS-232).
What kind of cables are used for input and output?
For HDMI In/Out, it can go up to 15 M/1080p@8-bit or 6M/1080p@12-bit In and 15M/1080p@8-bit or 10M/1080p@12-bit Out. For CAT6 In/Out, it can go up to 100 Meters.
What is the ESD Protection?
+/-8kV (air-gap discharge), +/-4kV (contact discharge)
What type of power supply does it use?
It uses a 48 V/0.83 A DC (US/EU Standards, CE/FCC/UL certified) power supply.
What is the humidity range it can operate in?
20~90% RH (non-condensing)