SL830

18

Example 2 : To record everyday from 10 : 00 to 18 :

00, in 18-hour mode (recording speed)

1 Repeat steps 1 to 3.

2 Press the SHIFT button, until the cursor is on

“DLY”. The MENU below is displayed.

3 Repeat steps 5 to 13.

Programmed timer recording Example 2

Changing a Program Timer Recording

1 Press the MENU, SHIFT , SHIFT , SHIFT buttons in sequence to display the TIMER PROGRAM

SET(1) menu.

2 Press the SHIFT (or ) button, until the cursor is located in the setting to correct.

3 Press the SET - (or +) button, to correct the setting.

• Press the MENU button three times until the normal screen is displayed.

4 Press the STANDBY/ON(POWER) button.

To Cancel a Program Timer Recording

1 Repeat step 1 above.

2 Press the SHIFT (or ) button until the cursor is located in the “Y” corresponding to the timer recording to cancel.

3 Press the SET - (or +) button, to select “N”.

4 Press the MENU button three times until the normal screen is displayed.

5 Press the STANDBY/ON(POWER) button.

• The clear button can erase the programmed timer recording in the line that the cursor is located.

Notes...

• During timer recording all the buttons on the VCR, except the STOP button, are disabled. If the STOP button is pressed for three seconds during timer recording, the recording will stop. During timer recording stand-by, press the STANDBY/ON(POWER) button if the buttons do not respond.

• If there is a power loss, the recording will be interrupted.

When the power is restored, the recording will resume if the stop time has not yet been reached, and “

” will be flashing on the display panel. The VCR internal battery is completely charged after the VCR has been connected to an AC power outlet for 48 hours, and it will maintain all the VCR settings memory for up to 30 days.

• Set the timer recordings so that the recording times do not overlap. If they do, the one with the earliest recording start time will have priority.

(See chart below)

Time Lapse Video Cassette Recorder Time Lapse Video Cassette Recorder

• If the cassette tape is ejected while timer recording is set, the buzzer will be heard 5 times (when the buzzer function is set to “YES”.)

19