Operating and installation instructions Fridge freezer

Adjusting the interior fittings (refrigerator section)

Adjusting the door shelf / bottle shelf

 Push the door/bottle shelf upwards, then remove it by pulling it forwards

 Replace the door/bottle shelf at the required position. Ensure that it is securely pushed back into position.

Moving the shelves

The shelves can be adjusted according to the height of the food.

Adjusting the bottle rack

 Raise the shelf, and pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level.

The raised edge on the protective strip at the back must face upwards to prevent food from touching the back of the appliance and freezing to it.

Stoppers prevent the shelves from being dislodged by mistake.

The bottle rack can be placed at different positions in the appliance.

 Raise the bottle rack slightly at the front, and pull it forwards a little until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level.

The rear rail must face upwards to prevent bottles from touching the back of the appliance.

Stoppers prevent the bottle rack from being dislodged by mistake.

47