ASSEMBLY. Crane EE-8079

Add to My manuals
10 Pages

advertisement

ASSEMBLY. Crane EE-8079 | Manualzz

ASSEMBLY

WARNING:

Do NOT use this tower heater if any part has been under water.

Immediately contact Crane Customer Care or a qualified electrician to inspect or replace the heater if necessary. Keep plastic wrapping away from children.

1. Open the packaging, take the unit out and unscrew the Cover Fixer.

Be responsible when handling the packing materials.

2. Insert the Glass Base into the bottom of the unit and screw on the Cover Fixer.

3. Place the unit upright on a flat floor before use.

OPERATION AND USE

1. Place the heater on the floor in the desired location.

WARNING: Keep combustible materials – such as furniture, pillows, bedding, papers, clothes and curtains —at least 3 feet from the front of the heater. Also keep them away from the sides and rear.

2. Ensure that the heater’s Power is Off.

3. Plug the heater into a 120VAC outlet. This heater has a polarized plug ((one blade is wider than the other). As a safety feature to reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

4. Choose your desired heater setting (below) and enjoy your new tower heater.

Display Panel

1. Press to turn on the heater, press it again to turn off the heater.

2. When the unit is on, press to switch Low/High power.

3. When the unit is on, press

4. When the unit is on, press

to switch On/Off the oscillation function.

H /

°

F

to set time and temperature. a) Set Time: Press

12h.

H /

°

F

once, then use and to set time from 1h to b) Set Temperature: Press

H /

°

F

a second time, then use and to set temperature in the range 59-95 °F. Each time you press the buttons or

5. Press

the temperature will increase or decrease by 1°F.

H /

°

F

a third time to confirm your set time and temperature. Once you have done so, the display will read the current room temperature and will automatically maintain the set temperature by turning the heating elements on and off during the set time.

Note:

If you touch the sensor

H /

°

F

, the control light will flash for a time of 5 seconds. If you do not press any button within 5 seconds or you press a button other than SET, or , then the LED display will display the temperature in the room.

5

When the temperature in the room is lower than 15°F, the display will show "LO" (low temperature). When the temperature in the room is higher than 99°F, the display will show "HI" (high temperature). When the temperature is in the range 15 - 99°F, then the display will show the actual temperature in the room.

There are 6 buttons on the remote control. Their function is equivalent to the functions of the touch sensors on the control panel of the device. If you wish to use the remote control, point the remote control at approximately the level of the control panel with the display. The maximum signal range of the remote control is 6 meters. If you place the remote in such a way that the transmission of the signal is blocked by barrier, the signal may not be transmitted at all.

SAFETY PROTECTION SYSTEMS

This unit has protection safeguards that shut off the unit when components become excessively hot or if it tips over.

TIP OVER SWITCH

This heater has a built-in safety feature to automatically turn off the device when it is tipped over. If the device falls over this function serves as protection against a dangerous situation.

OVERHEAT PROTECTION

The heater has an internal, over-heating safety device which automatically switches the heater off if an over-heat situation is detected. If this should occur, unplug the appliance and wait until the unit cools off. Once the unit has fully cooled, you can switch it on again.

6

MAINTENANCE

CAUTION:

Always be sure that the heater is switched OFF, unplugged and completely cooled before cleaning or attempting to store the item. Do not immerse heater in water or allow water to drip into the interior of the heater, as this could create an electric shock hazard.

Please Note: Regardless of the type of heating system setup, always install and maintain at least one smoke detector in good working condition on each floor of your home. Periodically check and/or replace the battery in your smoke detector with a fresh battery.

CARE AND CLEANING

1. Always turn off the heater and disconnect the cord from the electrical outlet before cleaning your heater.

2. Light accumulated dust may be removed from the heater with a soft cloth or vacuum cleaner.

3. Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.

DO NOT use any detergents or abrasives and do not allow any water to enter the heater.

DO NOT allow water to run into the interior of the heater as this could create a fire or electric shock hazard.

4. The fan motor is lubricated for life and will not require further lubrication.

AIR FILTER

Dirt and dust may be caught on the air filter during operation. The caught dirt and dust may negatively affect the function of the device. So clean the air filter regularly.

Remove the grill for the inflow of air from back part of the device. Remove the air filter from the grill. Wash the filter by hand in a lukewarm solution of water and detergent.

Then rinse the filter in clean water and allow it to dry thoroughly. Place the clean, dry filter back into the back grill and attach it to the device. Do not use the device without the filter and back grill being installed.

STORING

Allow the appliance to cool completely before storing. Store the appliance in a dry location. Do not place any heavy items on top of appliance during storage as this may result in possible damage of appliance. Store the cord in a clean, dry location away from metal objects. Always check the plug before use to assure metal items have not become attached

.

7

CUSTOMER CARE

If you have any questions with regard to the operation of this ceramic heater, please contact Crane Customer Care.

Crane USA, Inc.

621 IL Route 83, Suite 202

Bensenville, Illinois 60106

Toll Free: 1-888-599-0992 (Monday - Friday 9:00am - 4:00pm CST)

Email: [email protected]

Website: http://www.crane-usa.com

ENVIRONMENTAL PROTECTION

If the heater should no longer operate, please be sure to dispose of the unit in an environmentally friendly way by taking it into a public collection point. Please do not place broken heaters with your regular household waste.

8

LIMITED WARRANTY

Thank you for purchasing a Crane product. This Ceramic Tower Heater was tested and meets our stringent quality standards. This product is warrantied to be free from manufacturing defects under normal use and conditions for 1 year.

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE. CALL US FOR

PROBLEMS AND QUESTIONS. WE CAN HELP.

If you experience unsatisfactory operation, first refer to the troubleshooting section in the manual to ensure that it is not due to care or cleaning. Follow Care and Cleaning Instructions from manual. You can also visit www.crane-usa.com

Customer Care for information.

If you have any questions or comments, please call Crane Customer Care, Toll

Free: 888-599-0992 or Email [email protected]

. Please specify the style and model number so our Customer Care Department can assist you.

WARRANTY REQUIRES A DATED PROOF OF PURCHASE.

This warranty is void if the defect is due to accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, or a failure to follow operating instructions provided with the product. This warranty does not apply to normal wear and tear or commercial use.

The warranty is non-transferable and applies only to the original purchaser and does not extend to subsequent owners of the product. Liability under this warranty is limited to repair or replacement. In no event shall liability exceed the purchase price paid by the purchaser of the product. Under no circumstances shall there be liability for any loss - direct, indirect or incidental – or consequential damage arising out of, or in connection with the use of this product.

This warranty is valid only in the 48 contiguous states plus the District of

Columbia and excludes Puerto Rico and the Virgin Islands. This warranty is effective only if the product is purchased and operated in the United States of

America.

This warranty gives you specific legal rights; however you may have other rights that vary from state to state. Some states do not allow limitation on implied warranties or exclusion of consequential damages; therefore these restrictions may not apply to you.

Any instructions or warranty included in this manual may be subject to change without notice. For the most up-to-date instructions and warranty information, please contact us or visit our website.

To receive warranty instructions and return authorization, please call or email

Crane Customer Care.

Crane USA, Inc.

621 Route 83, Ste 202, Bensenville, Illinois 60106

Toll Free: 1-888-599-0992 (Monday - Friday 9:00am - 4:00pm CST)

Email: [email protected]

Website: http://www.crane-usa.com

9

advertisement

Related manuals

Frequently Answers and Questions

Where do I find information about the operation of my ceramic heater?
Contact Crane Customer Care toll-free at 888-599-0992 or email [email protected].
What is the maximum wattage of the ceramic heater?
The maximum wattage is 1500W with two heating power settings of 800W and 1500W.
What is the recommended surface to use with this heater?
A flat, steady, stable, and heat-resistant surface.
How far should combustible materials be from the heater?
At least 3 feet (0.9 meters) from all sides of the heater.
Where can I find information about all CRANE products?
Visit http://www.crane-usa.com.

advertisement

Table of contents