Good Read LED. Datalogic TC1200

TC1200 REFERENCE MANUAL

6. If less than the expected string of 20 characters are selected, scan the ENTER/EXIT barcode to terminate the string.

7. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming Mode.

This completes the procedure.

Specifies when the scanner will provide indication upon successfully reading a barcode.

Selections:

On Decode = Indicate Good Read immediately after decoding.

After Transmission = Indicate Good Read after code transmission towards host.

122

Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project