5 BATTERY CASE. ICOM IC-F9011T, IC-F9011S

21

5

BATTERY CASE

■

Optional battery case (BP-237)

The optional battery case uses 6 × AA (LR6) size alkaline batteries. The battery case offers low output power.

q

Hook your finger under the latch, and open the cover in the direction of the arrow (q). (Fig.1) w

Then, install 6 × AA (LR6) size alkaline batteries. (Fig.2)

• Install the alkaline batteries only.

• Be sure to observe the correct polarity.

• Do not pin the ribbon under the batteries.

e

Close the cover by fitting in the direction of the arrow (w) first, then check the latch is in place (e). (Fig.1)

• Be sure the gasket is set correctly, and do not protrude from the battery case. (Fig.3)

CAUTION:

• When installing batteries, make sure they are all the same brand, type and capacity. Also, do not mix new and old batteries together.

• Keep battery contacts clean. It’s a good idea to clean battery terminals once a week.

• Never incinerate used battery cells since internal battery gas may cause them to rupture.

• Never expose a detached battery case to water. If the battery case gets wet, be sure to wipe it dry before using it.

Fig.3

Fig.1

q

BP-237

Latch w e

Fig.2

Gasket