advertisement
TABLE 6
TEMPERATURE PRESSURE CHART
-25 [-31.6]
-20 [-28.8]
-15 [-26.1]
-10 [-23.3]
-5 [-20.5]
0 [-17.7]
5 [-15]
10 [-12.2]
15 [-9.4]
20 [-6.6]
25 [-3.8]
30 [-1.1]
35 [1.6]
40 [4.4]
45 [7.2]
50 [10]
TEMP
(Deg. F) [°C]
-150 [-101.1]
-140 [-95.5]
-130 [-90]
-120 [-84.4]
-110 [-78.8]
-100 [-73.3]
-90 [-67.7]
-80 [-62.2]
-70 [-56.6]
-60 [-51.1]
-50 [-45.5]
-40 [-40]
-35 [-37.2]
-30 [-34.4]
55 [12.7]
60 [15.5]
65 [18.3]
70 [21.1]
75 [23.3]
80 [26.6]
85 [29.4]
90 [32.2]
95 [35]
100 [37.7]
105 [40.5]
110 [43.3]
115 [46.1]
120 [48.8]
125 [51.6]
130 [54.4]
135 [57.2]
140 [60]
145 [62.7]
150 [65.5]
22.0 [151.7]
26.4 [182.0]
31.3 [215.8]
36.5 [251.6]
42.2 [290.9]
48.4 [333.7]
55.1 [379.9]
62.4 [430.2]
70.2 [484.0]
78.5 [541.2]
87.5 [603.3]
97.2 [670.2]
107.5 741.2]
118.5 [817.0]
130.2 [897.7]
142.7 [983.9]
R-410A
PSIG [kPa]
—
—
—
—
—
—
—
—
—
0.4 [2.7]
5.1 [35.1]
10.9 [75.1]
14.2 [97.9]
17.9 [123.4]
156.0 [107.6]
170.1 [1172.8]
185.1 [1276.2]
201.0 [1385.8]
217.8 [1501.7]
235.6 [1624.4]
254.5 [1754.7]
274.3 [1891.2]
295.3 [2036.0]
317.4 [2188.4]
340.6 [2348.3]
365.1 [2517.3]
390.9 [2695.2]
418.0 [2882.0]
446.5 [3078.5]
476.5 [3285.3]
508.0 [3502.5]
541.2 [3731.4]
576.0 [3971.4]
612.8 [4225.1]
16.5 SUBCOOLING CALCULATION
1. Measure the liquid pressure at the liquid line service valve.
2. Convert the liquid line pressure to saturated temperature. See Table 6.
3. Measure the liquid line temperature at the liquid line service valve.
4. Compare the liquid line temperature to the saturated temperature.
5. The difference between saturated temperature and liquid line temperature is the subcooling. Subcooling normal range 9° to 12° in the cooling mode. Subcooling in the heating mode can vary widely from model to model and should never be used to determine the correct charge in the field.
TABLE 7
HEAT PUMP SYSTEM TROUBLESHOOTING TIPS
SYSTEM PROBLEM
Overcharge
Undercharge
Liquid Restriction (Drier)
Low Evaporator Airflow
Dirty Heat Pump
Low Outside Ambient Temperature
Inefficient Compressor
TEV Feeler Bulb Charge Lost
Poorly Insulated Sensing Bulb
HEAT PUMP SYSTEM
TROUBLESHOOTING TIPS
INDICATORS
DISCHARGE SUCTION
PRESSURE PRESSURE
High High
Low
Low
Low
High
Low
Low
Low
High
Low
Low
Low
High
Low
High
Low
High
SUPERHEAT SUBCOOLING
Low
High
High
Low
Low
High
High
High
Low
High
Low
High
Low
Low
High
High
High
Low
COMPRESSOR
AMPS
High
Low
Low
Low
High
Low
Low
Low
High
25
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 SAFETY INFORMATION
- 4 GENERAL INFORMATION
- 4 Checking Product Received
- 4 Applications
- 5 Dimensions
- 6 Electrical and Physical Data
- 6 LOCATING UNIT
- 6 Corrosive Environment
- 7 Heat Pump Location
- 7 Operational Issues
- 7 For Units With Space Limitations
- 8 Customer Satisfaction Issues
- 8 Unit Mounting
- 8 Factory-Preferred Tie-Down Method
- 10 REFRIGERANT CONNECTIONS
- 10 REPLACEMENT UNITS
- 10 INDOOR COIL
- 10 Location
- 11 INTERCONNECTING TUBING
- 11 Vapor & Liquid Lines
- 11 Maximum Length of Lines
- 11 Vertical Separation
- 11 Tubing Installation
- 12 Tubing Connections
- 12 Leak Testing
- 15 DEMAND DEFROST CONTROL
- 15 Defrost Initiation
- 15 Defrost Termination
- 15 Temperature Sensors
- 15 Test Mode
- 15 Trouble Shooting Demand Defrost Operation
- 16 High/Low Pressure Control Monitoring
- 16 Enhanced Feature Defrost Control Diagnostic Codes
- 16 EVACUATION PROCEDURE
- 17 10.0 START UP & PERFORMANCE
- 17 11.0 CHECKING AIRFLOW
- 17 12.0 CHECKING REFRIGERANT CHARGE
- 17 12.1 Charging By Liquid Pressure
- 18 12.2 Charging By Weight
- 18 12.3 Final Leak Testing
- 18 13.0 ELECTRICAL WIRING
- 18 13.1 Power Wiring
- 18 13.2 Grounding
- 19 13.3 Control Wiring
- 19 14.0 FIELD INSTALLED ACCESSORIES
- 19 14.1 Compressor Crankcase Heat
- 20 14.2 Low Ambient Control
- 20 14.3 High Pressure Control
- 20 14.4 Heat Pump Thermostat Warning Light Kit RXPX-D
- 20 15.0 SERVICE
- 20 15.1 Single Pole Compressor Contactor
- 21 16.0 TROUBLESHOOTING
- 21 16.1 Electrical Checks Flow Chart
- 22 16.2 Cooling Mechanical Checks Flow Chart
- 23 16.3 Heating Mechanical Checks Flow Chart
- 24 16.4 Defrost Mechanical Checks Flow Chart
- 25 16.5 Subcooling Calculation
- 26 16.6 General Troubleshooting Chart
- 27 16.7 Service Analyzer Chart
- 32 17.0 WIRING DIAGRAMS
- 32 17.1 Enhanced Defrost Control - PSC Motor
- 33 17.2 Enhanced Defrost Control - ECM Motor