CONNECTING TWO TELEPHONES OR DATA DEVICES. Lucent Technologies CIB 3128

CONNECTING TWO TELEPHONES OR DATA DEVICES

For this installation you will need a 4-pair modular cord (provided), two

2-pair modular cords (not provided) and a 267A2 line bridging adapter

(not provided).

1

Plug one end of the 4-pair modular cord into the jack labeled LINE on the BTMI-2 (Figure 3).

2

Connect the other end of this cord to one of your system’s voice terminal jacks using any of the following methods:

>

Directly to a voice terminal jack on the control unit

>

To a modular voice terminal extension cord connected directly to a voice terminal jack on your control unit

>

To a modular wall jack that terminates in a jack field connected directly to a voice terminal jack on your control unit

3 Plug the line bridging adapter into the modular jack on one of the telephone or data devices to be connected.

Control unit

Line jack

Tel.

device jack

2-Pair modular cord

To telephone or data device

To telephone or data device

267A2

Line bridging adapter

4-Pair modular cord

2-Pair modular cord

FIGURE 3 Connecting Two Telephones or Data Devices to the BTMI-2

4 Plug a 2-pair modular cord into each of the jacks on the line bridging adapter.

iss 2, cib3128-6