2006 Beta Rev3 Owners Manual

3

60

The level check must be performed with the engine cold, as follows:

•Remove plastic grid D

•Unscrew cap AAAAA and check the level of the liquid

•lf the level is dose to the bottom of pipe proceed to add liquid

Circuit capacity is indicated in the table on pag. 43. Use the liquids recommended on the table on pag. 47.

WARNING:

To avoid burns, never unscrew the radiator filer cap when the engine Is hot.

If an increase in exhaust noise is noted, check the silencer.

Proceed as follows:

•Unscrew the two screws BBBBB

C

•Extract the preformed part in fiber wool and substitute with a new one

(disposable as spare-part)

•To reassemble, proceed in the reverse order.

GB