advertisement
0BAbout this document
1 About this document
Group of persons
Product Manager (PM)
Project Manager
Project Engineer
Installation personnel
Maintenance Personnel
Purpose of the document
This document contains all information on the manual call points FDM221,
FDM223 and FDM224.
The consistent observance of the instructions ensures a trouble-free and safe application.
Target group
This documentation and the instructions contained therein are intended for the following groups of persons, who perform tasks and have the necessary qualification:
Activity
He is in charge of local product management and is responsible for the interchange of information between the plant supplying the equipment and his DU for his product line. He co-ordinates the flow of information between the individual groups of people for the various projects.
The project manager is responsible for the local project management. He co-ordinates the schedules of all groups of people working on a project as well as resources. He also continuously obtains the technical information required for project realization.
Provides the parameterization of products, devices and systems in the DU for a specific country or customer. He monitors the serviceability of and gives the go-ahead for the commissioning of products, devices and systems at the place of installation. They are also responsible for trouble-shooting.
They install product, device or system components on site, and subsequently carry out a general performance check.
They carry out all the maintenance work indicated in the product documentation and check equipment for total serviceability.
Qualification
He has had training appropriate to his function and product range and has attended the product manager training course.
He has had the technical training appropriate to his function and the size of a project or the product line used in the project and has attended the training courses for project managers at the supplier's works.
He has had the training appropriate to his function and to the products, devices and systems to be parameterized and has attended the technical training courses for project engineers at the supply plant.
Professional training in the field of building automation or electrical installations.
They have had the technical training appropriate to their function and the product.
Reference documents
Number Name
007904
007905
Installation for FDM221, always enclosed with the detector
Installation for FDM223 and 224, always enclosed with the detector
Operational and safety regulations
Before groups of persons begin work on the system they must have read and understood the related documents, in particular Chapter "Safety regulations".2
Fire Safety & Security Products
5
007002_e_en_--.doc
11.2007
0BAbout this document
Disregard of the safety regulations
Before they are delivered, products are tested to ensure they function correctly when used properly. Siemens disclaims all liability for damage or injuries caused by the incorrect application of the instructions or disregard of warnings of danger contained in the documentation. This applies in particular to: z z
Personal injuries or damage caused by improper use and incorrect use;
Personal injuries or damage caused by disregarding safety instructions in the z documentation or on the product;
Personal injuries or damage caused by poor maintenance or a lack of maintenance.
Symbols and their meaning
=>
'Text'
-> see
Result, note
Quotation, reproduced identically
Cross reference
Technical terms
Term Explanation
FDnet
MC-Link
Addressed detector line
Maintenance and Commissioning Link
Document identification
Position Signification
Title page System names: e.g. CS1140 System
Product type: e.g. compact control unit CI1145
Purpose of the document: e.g. assembly, installation
Last page bottom left
Last page bottom left
Document number
Edition date
Manual
Register
Modification index
007002_e_en_-- 11.2007 FDMH292/3-x IP64 -> IP65
007002_d_en_-- 09.2007 Standards added
Diagnosis levels changed
007002_c_en_--
07.2007
'Technical terms' added
Corrections in 'Technical data':
- Line separator added
- Protection categories IP changed
- Standard EN54-17 added
- VdS and LPCB approvals added
007002_b_en_-- 09.2006 FDM224 included
Diagnosis levels added
007002_a_en_-- 01.2004 First edition
6
Fire Safety & Security Products
007002_e_en_--.doc
11.2007
advertisement
Related manuals
advertisement
Table of contents
- 5 About this document
- 7 Safety notes
- 7 Signal words and symbols
- 7 Classification and meaning of signal words
- 7 Symbols and their meaning
- 7 Classification and meaning of additional symbols
- 8 Safety-relevant working instructions
- 9 Overview
- 10 Setup and function
- 10 Manual call point FDM
- 13 Diagnosis levels
- 14 Accessories
- 15 Project planning
- 16 Installation
- 16 Preparation
- 17 Installation
- 17 Fixation
- 18 Inserting the protective cover
- 19 Electric connection
- 21 Commissioning
- 21 Localization and device test
- 21 Performance check
- 23 Maintenance / Troubleshooting
- 23 Status retrieval
- 23 General maintenance work
- 23 Resetting
- 25 Replacing the glass pane
- 27 Spare parts
- 28 Specifications
- 28 Technical data
- 30 Dimensional drawings
- 30 Dimensions
- 30 Master gauge for recesses
- 30 Environmental compatibility