IP & MAC Binding. Planet WNRT-617G

User’s Manual of WNRT-617G

5.14 IP & MAC Binding

There are two submenus under the IP &MAC Binding menu (shown in

Figure 5-78

): Binding Settings and ARP List. Click any of them, and you will be able to scan or configure the corresponding function.

The detailed explanations for each submenu are provided below.

Figure 5-78 the IP & MAC Binding menu

5.14.1 Binding Settings

This page displays the IP & MAC Binding Setting table; you can operate it in accordance with your desire. (shown in

Figure 5-79

).

Object

MAC Address

Figure 5-79 Binding Setting

The page includes the following fields:

Description

The MAC address of the controlled computer in the LAN.

IP Address

Bind

The assigned IP address of the controlled computer in the LAN.

Check this option to enable ARP binding for a specific device.

Modify

To modify or delete an existing entry.

-109-

User’s Manual of WNRT-617G

When you want to add or modify an IP & MAC Binding entry, you can click the Add New button or

Modify button, and then you will go to the next page. This page is used for adding or modifying an IP

& MAC Binding entry (shown in

Figure 5-80

).

Figure 5-80 IP & MAC Binding Setting (Add & Modify)

To add IP & MAC Binding entries, follow the steps below:

Step 1. Click the Add New... button as shown in

Figure 5-79

.

Step 2. Enter the MAC Address and IP Address.

Step 3. Select the Bind checkbox.

Step 4. Click the Save button to save it.

To modify or delete an existing entry, follow the steps below:

Step 1. Find the desired entry in the table.

Step 2. Click Modify or Delete as desired on the Modify column.

To find an existing entry, follow the steps below:

Step 1. Click the Find button as shown in

Figure 5-79

.

Step 2. Enter the MAC Address or IP Address.

Step 3. Click the Find button on the page as shown in

Figure 5-81

.

-110-