ARP List. Planet WNRT-617G

User’s Manual of WNRT-617G

Figure 5-81 Find IP & MAC Binding Entry

Click the Enable All button to make all entries enabled.

Click the Delete All button to delete all entries.

5.14.2 ARP List

To manage the computer, you could observe the computers in the LAN by checking the relationship of

MAC address and IP address on the ARP list, and you could configure the items on the ARP list also.

This page displays the ARP List; it shows all the existing IP & MAC Binding entries (shown in

Figure

5-82

).

The page includes the following fields:

Object

Figure 5-82 ARP List

Description

-111-

User’s Manual of WNRT-617G

The MAC address of the controlled computer in the LAN.

MAC Address

IP Address

The assigned IP address of the controlled computer in the LAN.

Indicates whether or not the MAC and IP addresses are bound.

Status

Configure

Load or delete an item.

Load - Load the item to the IP & MAC Binding list.

Delete - Delete the item.

Click the Bind All button to bind all the current items, available after enable.

Click the Load All button to load all items to the IP & MAC Binding list.

Click the Refresh button to refresh all items.

An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been loaded before. Error warning will prompt as well. Likewise, "Load

All" only loads the items without interference to the IP and MAC Binding list.

-112-