— advertisement

—

A

‘Wow!’

difference in Rv control…

A remarkable improvement in stability and cornering control — for motorhomes or any large vehicle, especially towing combinations — is just a few bolts away. Anti-sway bars from Roadmaster Suspension Solutions deliver a

“Wow!” difference in RV control you’ll notice the first time you turn the wheel.

• 20 years of experience in the RV industry

• for motorhomes, trucks, vans and SUvs

• over 60 kits, each one custom-designed for

a specific chassis and suspension system

• large diameter, cadmium-plated

RSS

stock

4140 chromoly steel bars, with heavy-duty

polyurethane bushings

• easy installation — in most cases, eight bolts

• each kit comes complete with heavy-gauge

mounting hardware, easy-to-follow

instructions, and the bushing lubricant.

• website product locator finds the kit for your chassis — visit www.roadmasterinc.com; select ‘Products,’ then

‘Anti-Sway Bars,’ then ‘Search for anti-sway bars by vehicle.’

When tracking is an issue…

Davis Tru Trac

™

bars, manufactured by

Roadmaster Suspension Solutions, are designed to eliminate “wander” and reduce

“rut tracking” by controlling excessive axle side play. The result is crisper handling, and more positive control.

Davis Tru Trac bars are available for

Ford F53 chassis (V8 and V10), and all

Workhorse motorhome chassis (W16, W18,

W20, W22 and W24), Freightliner front engine diesel chassis (FRED), as well as

Kodiak 45/5500 chassis.

A cAdmium-plAted rSS Anti-SwAy bAr bolted in place. Most installations take about the same amount of time as shock absorbers.

A high-grAde Alloy And A better pivot point — The stock anti-sway bar

(on the right) has a small diameter, 1020 grade spring steel, and a rubber bushing.

The RSS anti-sway bar (to the left) has a large diameter, 4140 chromoly steel, and a polyurethane bushing, making it many times more resistant to sway.

for more information…

Call Roadmaster (800-669-9690), or visit www.roadmasterinc.com