Laser Cautions. Psion Teklogix PowerScan Hand-Held

Below you will find brief information for bar code scanner PowerScan Hand-Held. This is a quick reference guide containing information that can help you use your new scanning device right out of the box. You will find information about how to install the device, how to scan a bar code, the distance you should hold your scanner from the bar code, and how to test the scanner. You can also find information about the supported barcode symbologies and how to troubleshoot common issues. This manual will give you the information you need to get started scanning right out of the box.

PDF

Document

Hello! I am an AI chatbot specifically trained to assist you with the Psion Teklogix PowerScan Hand-Held Reference guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Hand-held bar code scanner
Easy to use
Multiple symbologies supported
Various depth of field options
Enhanced scanning for hard-to-read bar codes
Designed for ease of use
Multiple languages supported
User-friendly interface
High-quality scanning

Frequently asked questions

Connect the interface cable to the proper port on the host terminal. If your system requires an AC/DC adapter to power the scanner, connect the adapter's power cord at the I/F connector and the AC/DC adapter at the wall outlet. Verify operation by pointing at a flat surface and pulling the trigger. A red beam should be visible. Scan a sample bar code and confirm that the scanner reads the bar code by beeping and/ or sending the data to the host terminal.

Point the scanner at a slight angle to the bar code. Do not hold the scanner perpendicular to the bar code. Ensure the laser beam crosses the entire bar code.

The scanning range will vary depending on the model of the scanner. The 'Scanning Range' section of this document provides specific information on each model type and the corresponding depth of field.

The default symbologies enabled are Code 39, Code 128, and Interleaved 2 of 5.

The 'Troubleshooting' section of this document provides steps to help you diagnose and resolve common problems. If you are still unable to resolve the issue, contact your nearest Datalogic dealer.