advertisement
Part names
AVC System
Front view
POWER button
POWER indicator
INPUT 4 terminal (VIDEO)
CARD indicator
INPUT 4 terminal
(S-VIDEO)
INPUT 4 terminal (AUDIO L/R)
How to open the door.
RESET*
SYSTEM RESET**
Headphone
(When connecting headphones, the sound from the speakers is muted.)
PC CARD slot
* Press RESET if the System cannot return to its original state after performing various operations.
This will reset the System as shown below.
• AV MODE resets to USER.
• TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• Dolby Virtual resets to Off.
• Image position is initialised.
• Still image mode deactivates.
• Speaker setting resets to SPEAKER-A.
• Audio Out setting resets to Fixed.
• Centre Channel Input setting resets to Off.
• Audio Only setting resets to Off.
** Press SYSTEM RESET if the System does not operate after starting up.
NOTE
• Pressing RESET will not work if the System is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and password. See page 56 for resetting the password when you know it.
See page 66 for initialising to the factory preset values in case you forget your password.
Rear view
INPUT 5 terminal
(AUDIO R/L)
INPUT 5 terminal
(DVI-I)
INPUT 3 (Y, P
B
, P
R
)
ANTENNA INPUT terminal
INPUT 1 (SCART)
INPUT 3 (SCART)
RS-232C** terminal
SPEAKER-B terminal
DISPLAY OUTPUT 1 terminal
DISPLAY OUTPUT 2 terminal
AV OUTPUT terminal
(VIDEO)
INPUT 2 (SCART)
DIGITAL AUDIO OUTPUT* terminal
AV OUTPUT terminals
CENTRE CHANNEL
INPUT terminal
(AUDIO L/R)
DISPLAY
OUTPUT 3
DC OUTPUT terminal terminal
(Terminal for expanded functionality in the near future.)
*Connect a digital audio equipment.
**Provided for command from PC (see pages 61 and 62).
AC INPUT terminal
• Use RCA/SCART conversion connector to connect with external equipment. Connector without S-video input is
for INPUT 1. Connectors with S-video input are for INPUT 2 and 3.
15
LC-45G1H(E)-a 15 04.10.18, 6:38 AM
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Contents
- 3 Trademarks
- 4 Dear SHARP customer
- 6 Supplied accessories
- 6 Optional accessories
- 7 Preparation
- 7 Where to place the System
- 8 Setting the System
- 11 Setting the Display on the wall
- 12 Removing the stand and speaker
- 13 Inserting the batteries
- 13 Using the remote control unit
- 14 Basic connection
- 14 Connecting to an antenna
- 14 Connecting to the power outlet
- 15 Part names
- 15 Display
- 16 AVC System
- 17 Remote control unit
- 18 Turning on the power
- 18 Turning off the power
- 22 Basic adjustment settings
- 22 Menu operation buttons
- 22 On-Screen Display
- 23 TV/AV input mode menu items
- 24 Programme setup
- 24 Auto search
- 25 Manual setting for each channel
- 25 Search tuning
- 25 Fine tuning
- 26 Labelling channels
- 27 Setting the booster
- 28 Erase Programme
- 29 Language setting for on-screen display
- 29 OPC (Optical Picture Control) setting
- 30 Picture adjustments
- 31 C.M.S. (Colour Management System)
- 31 Colour temperature
- 31 Automatic Contrast
- 32 I/P setting
- 32 Film mode
- 32 Monochrome
- 33 Audio adjustment
- 33 Dolby Virtual
- 34 Power control for AV source
- 34 Power control for PC source
- 35 Using memory card
- 35 Important notes on using memory cards
- 37 Card Setup mode menu items
- 38 Recording a still image
- 39 Displaying a still image
- 39 Displaying slide show
- 39 Setting Slide Show
- 40 My Programme
- 40 Audio Select
- 40 Protecting/unprotecting still image files
- 41 Deleting a still image file
- 41 Deleting all still image files
- 42 Displaying a motion picture
- 42 Rec. Mode
- 42 Repeat
- 43 Deleting a motion picture file
- 43 Deleting all motion picture files
- 44 Using external equipment
- 44 Displaying a DVD image (Example)
- 45 composite cable
- 46 using component cable
- 46 Connecting a game console or camcorder
- 47 Connecting a PC
- 48 Speaker Setup
- 48 Connecting external speakers
- 48 Selecting speakers
- 49 Useful adjustment settings
- 49 Image position (for TV/AV input mode)
- 49 Audio Only
- 49 Auto Sync. adjustment (PC input mode only)
- 50 Fine Sync. adjustment (PC input mode only)
- 50 Input Select
- 52 AV mode selection
- 53 WIDE mode (for TV/AV input mode)
- 54 WIDE mode (for PC input mode)
- 55 Input signal (PC input mode only)
- 55 3D-NR (3D Noise Reduction)
- 55 Quick Shoot
- 55 Rotate
- 56 Mosquito Noise Reduction
- 56 Audio out
- 57 (for TV input mode)
- 58 Centre Channel Input
- 59 Useful features
- 59 Dual screen functions
- 61 PC compatibility chart
- 61 Connecting pin assignments for SCART
- 62 RS-232C port specifications
- 64 Specifications
- 65 Dimensional drawings