advertisement
5.1 Network Settings
5 Changing Camera Settings
5.1 Network Settings
The camera’s network settings are made when configuring the camera according to the instructions provided in the Setup Guide. You can change these settings later if necessary using the procedures described in this section.
Note
•
You must log in to the camera as the administrator in order to change these settings.
•
After changing network settings and clicking [Save], the camera must be restarted. All buffered images are deleted when the camera is restarted.
•
Ask your Internet Service Provider or network administrator for the appropriate network settings.
•
If you cannot access the camera after changing certain network settings, use the Setup Program to
confirm the camera’s IP address (see Page 143) or reconfigure the camera as explained in the Setup
Guide.
•
If your network uses the IPv6 protocol, see Page 130.
Operating Instructions 81
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 7 1 Camera Monitoring
- 7 Accessing the Camera
- 9 Viewing Live Camera Images
- 14 Using the Operation Bar
- 15 Aiming the Camera Lens
- 17 Limiting the Pan/Tilt Range
- 18 White Balance
- 19 Video Images (MJPEG and MPEG-4) and Image Refresh Rate
- 20 Zooming
- 21 Taking Snapshots
- 22 Registering and Changing Presets
- 23 Audio Features
- 24 Viewing Multiple Camera Images
- 26 2 Using Triggers to Buffer and Transfer Images
- 27 Configuring a Timer Trigger
- 30 Configuring a Sensor or Motion Detection Trigger
- 35 Disabling and Enabling a Trigger
- 36 Configuring the Camera to Transfer Images
- 37 Transferring Images by FTP
- 39 Transferring Images by E-mail
- 42 Transferring Images by HTTP
- 44 Configuring the Camera to Send Trigger Notifications
- 45 Sending Trigger Notifications by E-mail
- 48 Sending Trigger Notifications by HTTP
- 50 Viewing Buffered Images
- 54 Deleting Buffered Images
- 56 Adjusting Sensor Sensitivity
- 57 Adjusting Motion Detection Sensitivity
- 59 Sending Alarm Log Information
- 62 3 Mobile Phone Features
- 63 Accessing the Camera from Your Mobile Phone
- 64 Viewing Still Images on Your Mobile Phone
- 65 Viewing Alarm Logs on Your Mobile Phone
- 66 Enabling and Disabling Image Buffering Using Your Mobile Phone
- 67 4 Configuring the Camera for Access from the Internet
- 71 Configuring Port Forwarding
- 74 Configuring the Camera to Use a Dynamic DNS Service
- 75 Configuring the Camera to Use Viewnetcam.com
- 78 Configuring the Camera to Use a Third-party Dynamic DNS Service
- 80 Confirming Internet Access
- 81 5 Changing Camera Settings
- 81 Network Settings
- 82 Network (IPv4) Settings
- 87 Proxy Server Settings
- 88 Using the Camera in Wireless Mode (BL-C131A Only)
- 89 Configuring the Camera for Wireless Connection (BL-C131A Only)
- 93 Restarting the Camera in Wireless Mode (BL-C131A Only)
- 94 UPnP™ Settings
- 95 Setting the Date and Time
- 97 Changing Basic Camera Settings
- 98 Changing Audio Settings
- 99 Changing Video Streaming Settings
- 102 6 User Accounts
- 102 Understanding User Accounts
- 103 Changing the Administrator User Name and Password
- 104 General Users
- 107 Guest Users
- 109 The Login Tab
- 110 7 Advanced Settings
- 110 Changing Image Display Settings
- 113 Registering Multiple Cameras
- 115 Specifying Operation Times
- 117 Changing the Indicator Display
- 118 Privacy Mode
- 119 8 Camera Administration and Maintenance
- 119 Confirming Camera Status
- 120 Confirming Wireless Status (BL-C131A Only)
- 121 Confirming Session Status
- 122 Confirming Alarm Logs
- 123 Restarting the Camera
- 124 Updating the Camera Firmware
- 125 Saving Settings in a Configuration File
- 126 Restoring Settings from a Configuration File
- 127 Resetting the Camera
- 129 9 The [Support] Tab
- 130 10 Using IPv
- 131 Configuring Your Router for IPv
- 132 Configuring Your PC for IPv
- 133 Configuring Your Camera for IPv
- 136 Accessing the Camera in IPv6 Mode
- 137 11 PC Settings
- 137 Proxy Server Settings
- 140 Creating a Shortcut to the Camera
- 141 Changing the [Temporary Internet files] Setting
- 142 About the MPEG-4 Viewer Program
- 143 12 Using the Setup Program
- 146 13 Technical Information
- 146 Cleaning the Camera
- 147 ASCII Character Table
- 148 Internal Memory Specifications for Buffered Images
- 149 Default Setting List
- 153 Specifications